Department of Mechatronics Engineering, College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan
Auto-generated profile, based on publicly available information
Masood Ur Rehman
Department of Mechatronics Engineering, College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan
Taking inspiration from human tactile system, a sensitive biomimetic multimodal tactile sensor for discrimination of static and dynamic forces is presented in this paper. The multimodal tactile sensor has a piezoelectric-capacitive tandem for responding to the dynamic and static forces respectively. Sensor can cater to normal direction dynamic force signals with a piezoelectric part operating in the d33 mode and static force with a capacitive part. The capacitive sensing part has a unique configuration with a top electrode and two sets of differential pairs electrodes for the force measurement in x and y shear axis, and one electrode for normal force measurement. The experimental characterization of the sensor was performed for static, quasi-static and dynamic forces. Along with the static forces the sensor was also able to cater to dynamic forces up to 60 Hz. The force sensitivity of the sensor for the normal force is 0.084 pF/N and 0.035 V/N from the capacitive and piezoelectric part respectively for a force range of 10 N. Also, in the shear X and Y direction the sensor exhibited a sensitivity of 0.027 pF/N and 0.029 pF/N respectively in the force range of 1.2 N. Through the vibrotactile data, the sensor showed an ability to discriminate between two texture samples through a neural network classifier. The presented sensor owing to its dimension, performance and capabilities can find its application in minimally invasive robotic surgery, robotics, wearable devices, and prosthetics.
4 June 2024 in IEEE Transactions on Electron Devices
This article presents an experimental verification of the mode-localization effect between the two tines of a single double-ended tuning fork (DETF) microelectromechanical systems (MEMS) resonator and its application in measuring forces in the micro-Newton range. The two tines of a DETF resonator are considered as individual resonators while coupling strength is tuned through a tines gap, which enables the DETF to operate either in two modes operational region or a modal overlap regime. Finite element method (FEM)-based simulations of DETF structures are performed to analyze the effect of the tines gap on mechanical coupling strength that shows the inverse relation. The DETF resonators with three different tine gaps of 20, 40, and 60 $\mu$ m are experimentally evaluated and an open-loop frequency response is obtained. The experimental results show that two fundamental flexure modes occur at 41.7 and 42.75 kHz for 20 $\mu$ m, 42.55 and 43.05 kHz for 40 $\mu$ m, and a single mode at 44 kHz for 60 $\mu$ m tines gap. This shows the operating region shift from two modes to a modal overlap operating region as the tines gap widens. The potential application of a single DETF as a force sensor has been investigated through experimental measurements, and the results revealed higher sensitivity, resolution, and dynamic range for a single-mode operating region.