The pullout resistance of reinforcement, such as geogrids in mechanically stabilized earth (MSE) walls, includes the skin friction between the soil and solid geogrid surfaces. It also includes the bearing resistance against the transverse ribs, which has a greater influence on the production of pullout resistance. Taking the current limitations involved in producing woven polyester geogrids into consideration (i.e., the limited thickness of the transverse ribs), the amount of bearing resistance developed in front of transverse ribs is limited in the pullout mechanism. Thus, along with introducing an innovative and applied system, this research has endeavoured to demonstrate the effective performance of this new system in increasing the passive resistance — and thereby the pullout resistance — of standard geogrids. This new system, which is formed by adding steel transverse elements (a set of steel equal angles) to the ordinary polyester geogrids by means of nuts and bolts, is called an anchored geogrid (AG). The experimental results show that a spacing-to-height ratio of transversal elements equal to 5 gives the maximum pullout resistance for a polyester AG system in sandy soil used in the study. With an optimum arrangement, this system is capable of increasing the pullout resistance of the ordinary geogrid system by 65%. In addition, based on the plasticity solution, the pullout bearing failure mechanisms of a single isolated transverse element in the polyester AG system depend on overburden pressures.