1 March 2021 in Physics of Fluids
COVID-19, caused by the SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) virus, has been rapidly spreading worldwide since December 2019, causing a public health crisis. Recent studies showed SARS-CoV-2's ability to infect humans via airborne routes. These motivated the study of aerosol and airborne droplet transmission in a variety of settings. This study performs a large-scale numerical simulation of a real-world dentistry clinic that contains aerosol-generating procedures. The simulation tracks the dispersion of evaporating droplets emitted during ultrasonic dental scaling procedures. The simulation considers 25 patient treatment cubicles in an open plan dentistry clinic. The droplets are modeled as having a volatile (evaporating) and nonvolatile fraction composed of virions, saliva, and impurities from the irrigant water supply. The simulated clinic's boundary and flow conditions are validated against experimental measurements of the real clinic. The results evaluate the behavior of large droplets and aerosols. We investigate droplet residence time and travel distance for different droplet diameters, surface contamination due to droplet settling and deposition, airborne aerosol mass concentration, and the quantity of droplets that escape through ventilation. The simulation results raise concerns due to the aerosols' long residence times (averaging up to 7.31 min) and travel distances (averaging up to 24.45 m) that exceed social distancing guidelines. Finally, the results show that contamination extends beyond the immediate patient treatment areas, requiring additional surface disinfection in the clinic. The results presented in this research may be used to establish safer dental clinic operating procedures, especially if paired with future supplementary material concerning the aerosol viral load generated by ultrasonic scaling and the viral load thresholds required to infect humans.
23 November 2021 in Journal of Fluid Mechanics
The present paper uses the detailed flow data produced by direct numerical simulation (DNS) of a three-dimensional, spatially developing plane free shear layer to assess several commonly used turbulence models in compressible flows. The free shear layer is generated by two parallel streams separated by a splitter plate, with a naturally developing inflow condition. The DNS is conducted using a high-order discontinuous spectral element method (DSEM) for various convective Mach numbers. The DNS results are employed to provide insights into turbulence modelling. The analyses show that with the knowledge of the Reynolds velocity fluctuations and averages, the considered strong Reynolds analogy models can accurately predict temperature fluctuations and Favre velocity averages, while the extended strong Reynolds analogy models can correctly estimate the Favre velocity fluctuations and the Favre shear stress. The pressure–dilatation correlation and dilatational dissipation models overestimate the corresponding DNS results, especially with high compressibility. The pressure–strain correlation models perform excellently for most pressure–strain correlation components, while the compressibility modification model gives poor predictions. The results of an a priori test for subgrid-scale (SGS) models are also reported. The scale similarity and gradient models, which are non-eddy viscosity models, can accurately reproduce SGS stresses in terms of structure and magnitude. The dynamic Smagorinsky model, an eddy viscosity model but based on the scale similarity concept, shows acceptable correlation coefficients between the DNS and modelled SGS stresses. Finally, the Smagorinsky model, a purely dissipative model, yields low correlation coefficients and unacceptable accumulated errors.
17 April 2020 in Numerical Heat Transfer, Part B: Fundamentals
We present a novel hybrid scheme for the large eddy simulation (LES) of turbulent reacting flows. The scheme couples the discontinuous spectral element method (DSEM) solver for the unsteady compressible Navier-Stokes equations with a Monte Carlo particle filtered mass density function (FMDF) solver for the transport of reacting species. The method is capable of high-order simulations on unstructured grids. Mean particle estimate construction mimics the DSEM numerical procedure and utilizes variable basis functions. The scheme is tested on non-reacting and reacting Taylor-Green vortex flows. Studies of varying polynomial order, different basis functions for constructing particle estimates, and varying particle quantities are conducted. We demonstrate that a tent kernel, in conjunction with high polynomial order, produces the most accurate results. The chemically reacting simulations validate the hybrid scheme and demonstrate its applicability across a range of reaction regimes. The hybrid scheme's computational cost is 2.1 times the DSEM-LES solver.
1 December 2024 in Physics of Fluids
Leveraging the high-order nature of spectral element methods, this work introduces a methodology that enables instantaneous, local analysis of turbulent flows through a transformation to a modal space. It also introduces a dynamic explicit modal filter (DEMF) for removing the excess energy in large-eddy simulation of turbulent flows. The transformation is achieved through the application of the discrete Chebyshev transform to nodal solution values, and the resulting modes are employed to characterize and distinguish different turbulent flow properties. Implementing direct numerical simulation (DNS), a qualitative explanation of how modes can assess flow directionality and turbulence properties is provided by considering the modal representation at different locations for different turbulent flows. Additionally, reducing the resolution from DNS, it is shown how modes can qualitatively assess local flow resolvedness. A quantitative assessment of local flow resolvedness is conducted by calculating sequential energy levels from the modes and then comparing them between DNS and under-resolved cases. These energy levels correspond to different scales of motion and their behavior changes as turbulence intensifies and decays. It is observed that flow under-resolvedness manifests itself in the increased magnitudes of higher energy levels corresponding to small scales of motion. Finally, the new DEMF is discussed, which is triggered locally by comparing the local Kolmogorov length scale and the average grid spacing. The filter removes the excess energy in the detected under-resolved regions by selectively removing the energy of the modes that contribute to higher energy levels.