Stretchable sensors capable of detecting various mechanical stimuli are essential in wearable applications involving multiaxial motions. Previous wearable sensors are designed for sensing only single-axis deformation or multidimensional strains in a two-dimensional plane. Given the three-dimensional (3D) nature of multiaxial stimuli in practical applications, discriminating multidimensional strains in 3D space is critical and requires an integration of different anisotropic sensors for high sensitivity and selectivity. In this study, a skin-inspired multidimensional sensor capable of sensing 3D stimuli is developed by rationally integrating three sub-sensors, which simultaneously and selectively measure strains in three orthogonal axes. The 3D anisotropic sensing characteristics of the sub-sensors arising from their highly anisotropic structures enable the differentiation of 3D stimuli including in-plane tension, normal pressure and shear, and the distinction of in-plane strain directions with an unprecedented selectivity of 3.68 among existing stretchable sensors. With a remarkable gauge factor of 168 for in-plane strains and high sensitivity of 0.62 kPa−1 for normal pressure, the sensor is used in a smart sport assistant that can evaluate sport performance and provide feedback in real-time. The findings in this work provide a new anisotropic design of multidimensional sensors for emerging applications, such as smart electronics and humanoid robots.
8 November 2019 in Journal of Materials Chemistry A
With the increasing demand for wearable and implantable electronics, structured sensors with exceptional performance in sensitivity, stretchability, biocompatibility, and adhesion to the biological surfaces have become essential. Here, we report a novel graphene strain sensor, whose structure contains a carefully selected graphene foam (GF) and polyacrylamide/calcium-alginate (PAM/CA) double network hydrogel coupled with chitosan, can meet the above requirements to the maximum extent. Taking the advantage of the excellent electrical properties of graphene and the mechanical properties of hydrogel, this strain sensor can measure an exceptionally wide range of strain up to 500%, which allows us to monitor and distinguish almost all human body motions, with a gauge factor of ∼1800, which is up to 3 orders of magnitude larger than the 0.1–1000 value reported previously. The device also shows high stability and excellent durability for 1000 cycles. Most importantly, the chitosan-bridge and skin-like elastic modulus of 8–90 kPa allow conformal adhesion between the skin and hydrogel, with the adhesion energy of ∼200 J m−2. Moreover, this structured sensor is highly biocompatible and can be implanted in vivo, and has further potential in clinical applications.
27 August 2018 in IEEE Transactions on Power Systems
Frequency support from renewable power generators is critical requirement to ensure the frequency stability of remote area pow-er supply (RAPS) systems with high penetration of renewable power generation. However, traditional control strategies and the stochastic nature of wind resource constrain wind energy conver-sion system (WECS) such as permanent magnet synchronous generator (PMSG) from participating in frequency regulation. This work proposes to integrate hybrid energy storage including ultracapacitors (UCs) and lead-acid batteries (LABs) into a PMSG to provide frequency support. The UCs deal with fast changing frequency by emulating conventional inertial response, whereas the LABs mimic automatic governor response (i.e., pri-mary frequency response). The mechanical power reserved in wind turbine using suboptimal maximum power point tracking (SOPPT) strategy is utilized to restore system frequency (i.e., sec-ondary frequency response). Moreover, supplementary control strategies are proposed to enable the UCs and LABs to assist primary frequency response and secondary frequency response respectively. Simulation study and experimental test are carried out to validate the effectiveness of frequency response provided by the multilevel energy storage. The multilevel energy storage solution can effectively regulate RAPS system frequency while avoiding abrupt and frequent charging/discharging of the LABs and significant mechanical/electromagnetic stress on the WECS.
In this era of the Internet of Things, the development of innovative sensors has rapidly accelerated with that of nanotechnology to accommodate various demands for smart applications. The practical use of three-dimensional (3D) nanostructured materials breaks several limitations of conventional sensors, including the large surface-to-volume ratio, precisely tunable pore size and porosity, and efficient signal transduction of 3D geometries. This review provides an in-depth discussion on recent advances in chemical and mechanical sensors based on 3D nanostructures, which are rationally designed and manufactured by advanced 3D nanofabrication techniques that consider structural factors (e.g., porosity, periodicity, and connectivity). In particular, we focus on a proximity-field nanopatterning technique that specializes in the production of periodic porous 3D nanostructures that satisfy the structural properties universally required to improve the performance of various sensor systems. State-of-the-art demonstrations of high-performance sensor devices such as supersensitive gas sensors and wearable strain sensors realized through designed 3D nanostructures are summarized. Finally, challenges and outlooks related to nanostructures and nanofabrication for the practical application of 3D nanostructure-based sensor systems are proposed.
Risks and returns are two key considerations while firms make decision. Since Chinese economic environment is becoming more open, the diversity of finance is promoted; therefore, the studies on the impact of capital structure on firm operation and corresponding solutions are significant. There have been several researches focusing on this topic to find out the relationship between financial leverage and firm performance. This paper uses a sample of Chinese listed companies covering the period 2010-2019, to study the impact of financial leverage on firm performance, measured by return on assets (ROA). By using OLS and 2SLS methods to take linear regression, this research shows that the relationship between financial leverage and firm performance is significantly negative, while operating leverage positively moderates this relationship. In addition, by further researches, this study shows that the moderating role of operating leverage could be insignificant in real estate industry. This research is of certain significance for enterprises’ financing decision-making and risk management. It suggests that high debts are harmful to a firm’s performance, since it could introduce extra financial risks and agency costs; nonetheless, control the selling, general and administrative expense could be a good way to solve this problem. Based on all the researches above, some suggestions come up: Firstly, firms should maintain a proper capital structure. Moreover, management could adjust operating leverage to release the negative consequence of debt. Finally, real estate enterprises could afford higher financial leverage than other enterprises. At the end of this paper, the limitations of this paper are listed, and suggestions for future researches are put forward.
15 September 2023 in Machine Intelligence Research