A low-cost and highly compact fiber-optic component is proposed and experimentally demonstrated for vector bending sensing. A segment of microfiber tapered from standard single-mode fibers (SMFs) is spliced between two SMFs with pre-designed lateral offset to construct a sandwich type Mach-Zehnder interferometer of 243.32 μm in length. Sensing performances of the proposed vector bending sensor is theoretically analyzed in detail. As the applied curvature increases from 0.3873 m-1 to 3.0 m-1, the transmission spectra of the proposed sensor show distinct linear wavelength shift sensitivities for different directions, the maximum of which is up to 3.419 nm/m-1. Besides, temperature test indicates that the proposed sensor possesses a low temperature cross sensitivity of 33.71 pm/°C, which ensures its applicability for practical uses in temperaturefluctuated environment. Hence, our proposed vector bending sensor possesses such desirable merits as high sensitivity, compact size, low thermal crosstalk, low cost and orientation-dependent spectral response.
A multimode interferometer (MMI) for the measurement of a magnetic field based on concatenated S-tapered fibers is proposed and experimentally demonstrated. Spectrally interrogated magnetic field sensing is achieved by integrating the proposed MMI with magnetic fluids. The magnetic sensitivity of the MMI reaches 0.011 dB Oe −1 . Owing to its desirable advantages such as compactness, low cost, fast response and flexible structure, the proposed MMI is anticipated to find potential applications in in situ measurements of the magnetic field.
A compact, low-cost, fiber-compatible magnetic field sensor based on multimodal interference in an S-taper and up-fusion-taper fiber modal interferometer is designed and experimentally demonstrated. The spectral characteristics in response to applied magnetic field and environmental temperature have been analyzed in detail. Experimental results indicate that the magnetic sensitivity reaches -0.03464 nm/Oe for a magnetic field ranging from 40 to 160 Oe. The proposed sensor has a maximum temperature sensitivity of 0.04889 nm/°C when the temperature increases from 27 to 45 °C. The effect of temperature on wavelength shift could be resolved by using a matrix containing the magnetic field and temperature sensitivities for two selected interferometric dips.
A temperature-insensitive intensity-interrogated fiber sensor based on exposed-core multicore fiber for refractive index (RI) measurement is demonstrated by etching a seven-core fiber. The RI sensitivity of −287.252 dB/RIU is experimentally achieved.