16 November 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The drive to miniaturize power electronics motivates investigation into alternative passive component technologies such as piezoelectrics, which offer fundamentally higher power density and efficiency capabilities at small scales compared to magnetics. Piezoelectric transformers (PTs) have seen application in dc-dc converters, but these designs typically require additional magnetics for competitive efficiency. In this work, we systematically enumerate isolated and non-isolated dc-dc converter topologies and switching sequences capable of efficiently utilizing PTs as their only energy storage components. The proposed switching sequences maintain high-efficiency behaviors (e.g., zero voltage switching (ZVS), all-positive instantaneous power transfer, and minimal charge circulation) across wide voltage gain and load ranges. We present techniques for deriving these switching sequences’ ZVS regions, estimating PT efficiency, and solving for periodic steady state switching times; these offer insights for comparing and implementing design options. We then verify our analyses in a 180-500 V experimental prototype based on a commercially-available PT, which demonstrates significant efficiency gain through a proposed implementation.
8 July 2025 in Advanced Engineering Materials
12 March 2025 in Advanced Engineering Materials
On‐chip integration of inductors and transformers can enable power converters with high frequency, high control bandwidth, and low interconnect loss for high‐current computing applications. Nevertheless, depositing high‐quality magnetic materials that are back end of line compatible with complementary metal‐oxide‐semiconductor (CMOS) technology, affordable (fast deposition), but optimized for these applications is challenging. Nanogranular materials, such as CoZrO, are promising candidates as core materials for on‐chip magnetic components due to their low coercivity and high saturation flux density. However, the deposition rates of these materials remain limited, which limits their cost effectiveness. Herein, the high‐rate reactive magnetron sputtering process for homogeneous CoZrO coatings with soft magnetic properties at deposition rates 5 times higher compared to literature is presented. An extensive study is presented on the properties of CoZrO including vibration sample magnetometry, transmission electron microscopy, scanning electron microscopy, and X‐ray diffraction characterization results. The findings underscore the importance of maintaining elevated Co:O (at%) ratios up to 75:15 and ensuring uniform microstructure to achieve optimal magnetic properties, which are enabled by the closed‐loop O2 controller in our sputtering process.