With the recent application of time reversed acoustics and nonlinear elasticity to imaging mechanical damage, the development of time reversal based nondestructive evaluation techniques has begun. Here, diffusion bonded metal disks containing intentionally disbonded regions are analyzed using the time reversed elastic nonlinearity diagnostic. The nonlinear results are compared with linear ultrasonic imaging (C scan). Scanning electron microscopy is shown to illustrate the differences between the features seen by the linear and nonlinear methods.
In this letter, the equivalence between local and global measures of nonclassical nonlinear elasticity is established in a slender resonant bar. Nonlinear effects are first measured globally using nonlinear resonance ultrasound spectroscopy (NRUS), which monitors the relative shift of the resonance frequency as a function of the maximum dynamic strain in the sample. Subsequently, nonlinear effects are measured locally at various positions along the sample using dynamic acousto elasticity testing (DAET). After correcting analytically the DAET data for three-dimensional strain effects and integrating numerically these corrected data along the length of the sample, the NRUS global measures are retrieved almost exactly.
In acoustics, it is known that, for a given response signal at an arbitrary location, reciprocity and time reversal (TR) can be used to focus high levels of acoustic energy at that position. In solid media, elastic waves generally induce different disturbances in three directions. In this paper, both experimental and numerical wave propagation results for solid materials demonstrate the ability to use a scalar source, a three component detector and the reciprocal TR process to selectively focus each of the different vector components, either individually or collectively. The principle is explained from an analytical point of view. The numerical and experimental study demonstrates excellent temporal and spatial focalization. Applications of the selective vector component focusing can be found in damage imaging techniques using both linear or nonlinear ultrasonic waves.