1 November 2022 in Physics of Fluids
A masked gated recurrent unit (GRU) model is proposed to establish the mapping relationship between surface pressures on a square cylinder and wake velocities, which can be used to predict statistical and instantaneous aerodynamic pressure fields on a square cylinder from its wakefield. A novel mask net is proposed to figure out one or two wake points where the velocities contribute dominantly to the surface pressure field. A three-dimensional unsteady large-eddy simulation of flow around a square cylinder is performed at Re = 22 000 to generate data for training and validating the proposed models. Results show that local mean pressure coefficients can be well predicted from velocities at even one wake point, but the accuracies of predicting fluctuating pressure coefficients and time-series of local pressure coefficients depend on both the model and the surface pressure location, with more satisfactory predictions achieved in the cross-flow direction. High correlation coefficients of pressure coefficient distributions around a square cylinder between predicted and real distributions are achieved except for the masked GRU model with one wake point. Meanwhile, in terms of the temporal correlation coefficient, all models exhibit good prediction of time-series of pressure coefficients on the side and back surfaces where they are strongly affected by vortex shedding and lower accuracy on the front surface where the pressure coefficients deviate somewhat randomly around the mean value. Large prediction error occurs at the corners of the square cylinder. This study has potential application to risk analysis of structures subject to flow-induced loads.
27 May 2024 in IEEE/CAA Journal of Automatica Sinica
Accurately predicting fluid forces acting on the surface of a structure is crucial in engineering design. However, this task becomes particularly challenging in turbulent flow, due to the complex and irregular changes in the flow field. In this study, we propose a novel deep learning method, named mapping network-coordinated stacked gated recurrent units (MSU), for predicting pressure on a circular cylinder from velocity data. Specifically, our coordinated learning strategy is designed to extract the most critical velocity point for prediction, a process that has not been explored before. In our experiments, MSU extracts one point from a velocity field containing 121 points and utilizes this point to accurately predict 100 pressure points on the cylinder. This method significantly reduces the workload of data measurement in practical engineering applications. Our experimental results demonstrate that MSU predictions are highly similar to the real turbulent data in both spatio-temporal and individual aspects. Furthermore, the comparison results show that MSU predicts more precise results, even outperforming models that use all velocity field points. Compared with state-of-the-art methods, MSU has an average improvement of more than 45% in various indicators such as root mean square error (RMSE). Through comprehensive and authoritative physical verification, we established that MSU's prediction results closely align with pressure field data obtained in real turbulence fields. This confirmation underscores the considerable potential of MSU for practical applications in real engineering scenarios. The code is available at https://github.com/zhangzm0128/MSU.