Active electrode material in‐conjunction with an electrolyte allows to expand the horizons of electrochemical properties and safety of Li‐ion/Li–metal batteries. The role of electrolyte is pivotal in determining the performance metrics of rechargeable Li‐based batteries. However, the unavoidable side‐reactions imposed on the electrode active material and electrolyte due to the thermodynamic and kinetic conditions in a battery limits its performances. Electrolytes being ubiquitous for both the electrodes, a rational formulation containing a functional additive holds a great promise to tune the interfacial properties of electroactive material and to control the parasitic side reactions. Functional electrolyte additives are target specific, which serve the purpose of mitigating critical concerns related to material's properties, electrochemical performance, and safety of batteries scattered under different identities/chemistries. This review exclusively focuses on the significant impact of functional electrolyte additives on advancing the electrochemical performance, cycle‐life, and safety of Li‐ion/Li–metal batteries. The classification of additives and their mechanistic role is detailed on the basis of target‐oriented actions involving film formation and its abnormal growth, capacity retention, overcharge/over‐discharge, high‐voltage, wide‐temperature operation, acid and water contaminant, gas evolution, flammability, and aluminum corrosion. A perspective on the electrolyte and additive engineering considerate with the battery performances is detailed.
High-entropy alloys have emerged as a class of materials, offering unique properties due to their irregular and randomized arrangement of multiple elements in an ordered lattice. This concept has been extended to two-dimensional (2D) van der Waals materials, including transition metal dichalcogenides (TMD), which exhibit promising applications in electrocatalysis. In this work, we have explored the synthesis of entropy mixture crystals (TMDmix) involving the chemical vapor transport of five individual elements, Mo and W as metal elements, S, Se, and Te as chalcogenide elements, resulting in a crystalline structure with a controlled composition Mo0.56W0.44(S0.33Se0.35Te0.32)2, with an estimated ΔSmix of 0.96R. When observed along the [001] zone axis, STEM HAADF images indicate the presence of the different crystal phases of the 2D TMDs (1T, 2H, and 3R). Our findings demonstrate the potential of the entropy TMDmix materials as catalysts for the hydrogen evolution reaction, offering an alternative to noble metal-based catalysts. To maximize the potential of TMDmix, we chose chemical exfoliation with the resulting material being subdivided into size groups, big and small, according to their lateral size. In an acidic medium, the lowest overpotential of 127 mV and a Tafel slope of 79 mV/dec were obtained for the exfoliated sample with a small lateral size (exf-TMDsmall).
Designing an affordable device that seamlessly combines efficient electrochemical energy storage with straightforward, robust protocols represents a promising pathway for ushering in the next generation of green power solutions and fostering a sustainable society. In this work, CoMoO4, vanadium-doped CoMoO4 (V-CoMoO4), and fluorine–vanadium-doped CoMoO4 (F-V-CoMoO4) were synthesized in situ on nickel foam (NF) using a hydrothermal method, followed by thermal treatment, resulting in a hierarchical structure with interconnected nanosheets and open porous channels. V2C MXene was used as the vanadium source, which was fully oxidized during the synthesis. This unique architecture is particularly advantageous for supercapacitor applications, as it facilitates efficient electrolyte flow, promotes the formation of oxygen defects that enhance ion transport, and ultimately maximizes electrochemical performances. At a current density of 2.5 mA/cm2, the F-V-CoMoO4 electrode achieves an areal capacitance of approximately 2250 mF/cm2 (900 F/g at 1 A/g), outperforming pristine CoMoO4 (180 mF/cm2, 72 F/g) and V-doped CoMoO4 (810 mF/cm2, 324 F/g). An asymmetric supercapacitor is fabricated using an F-V-CoMoO4@NF//AC@NF device and PVA/KOH gel electrolyte, showing excellent redox behavior and cycling stability, with 100% capacity retention after 2000 cycles at a current density of 1 Ag–1. Moreover, the developed device exhibits a specific energy density of 11.5 Whkg–1 and a power density of 225 Wkg–1 at a current density of 0.3 A/g. These findings highlight the potential of F–V doping in enhancing the electrochemical properties of CoMoO4-based electrodes.
Addressing the energy crisis and environmental pollution demands the development of efficient electro‐ and photocatalysts capable of facilitating hydrogen production via water splitting. Engineering semiconductor‐based 2D heterostructures with remarkable visible‐light harvesting capability proves to be an effective approach for constructing profoundly active electro‐photocatalytic entities. This paper focuses on designing a heterostructure comprising tungsten disulphide (WS 2 ) integrated with molybdenum sesquisulfide (Mo 2 S 3 ) to increase electrocatalytic activity. Moreover, nanoengineering the 2D/2D heterostructure with varying lateral dimensions increases the density of catalytic active sites. Due to its superior geometric configuration, the polarization curves of the Mo 2 S 3 ‐WS 2 composite display outstanding characteristics as a bifunctional electro‐photocatalyst, with low overpotentials (η) of 92 mV for hydrogen evolution reaction (HER) and 310 mV for oxygen evolution reaction (OER) at a current density of 10 mA cm 2 , maintaining stability for up to 100 h. The electrolyzer achieved a current density of 1 A cm 2 with a cell voltage of 2.07 V, corresponding to a voltage efficiency of 72%. Integrating the electrolyzer with a commercial silicon solar cell enabled efficient solar‐driven water splitting, reaching a current density of ≈0.8 A cm 2 at an applied voltage of 2 V. This work provides valuable insights into the design of innovative hetero‐nanostructures with superior catalytic properties for water splitting, contributing to a sustainable energy future.
Antimony-based 2D materials are one of the leading post-graphene materials, as they are promising for various applications due to their customizable properties and versatile synthesis methods, allowing an exceptional degree of control in developing 2D devices. We have investigated Sb2S2O-based photodetectors, demonstrating photoresponsivity in the UV-Vis spectrum. We have inspected the material and device's structural, chemical and optical properties, with the determined Sb2S2O bandgap of 2.04 eV with sub-bandgap emissions, which we correlate with obtained device performances. The reported best device responsivity is relatively high at 1.7 A/W, with a relatively low response time of 500 ms, indicating a photogating mechanism dominated nature, confirmed by the sublinear power dependence of photoresponsivity. Additionally, we have demonstrated the ambient stability of Sb2S2O, showing that it can function without needing protective top coatings. This opens up possibilities for surface functionalization and further optimization of the device. We also observed a distinct anisotropy in its Raman spectra, most prominent for the mid-frequency peak corresponding to Sb-O stretching modes and the peaks from interlayer interactions, expanding the potential applications of Sb2S2O in polarization-sensitive electronic devices.
23 June 2021 in ECS Journal of Solid State Science and Technology
Here we investigate an energy harvesting effect on various types of stress applied to the piezoelectric polymer-filler based thin films. A solvent casting technique was used to fabricate well-crystalline graphene-lead oxide/PVDF (GLP) nanocomposite 2D material. The structure, morphology, and functional composition of GLP were studied by various characterization techniques. As-synthesized GLP harbors the twin advantage of graphene and lead in the sense that it is not only highly capacitive in nature with 95% retention, but also exhibits enhanced electrical conductivity of 1 μ S cm −1 . The improved preparation method of GLP can thus make it suitable as an energy harvesting material in helping it display an output voltage of 16 V. From our electrostatic study of the device model, it is further apparent that GLP can demonstrate excellent breakdown strength of 650 V m −1 with relatively low dielectric losses.