This study investigates the performance enhancement of wound field synchronous motors (WFSMs) through a design method that incorporates grain-oriented electrical steel (GOES). Cross-magnetization, resulting from the overlapping fluxes of the d - and q -axes, occurs within the rotor of the WFSM. Consequently, rotor design must enable optimal utilization of cross-magnetization to enhance electromagnetic performance. This study proposes an approach that utilizes the magnetic properties aligned with the easy axis of GOES, aiming to improve cross-magnetization utilization and reduce copper loss. Electromagnetic torque improvements are demonstrated by analyzing the magnetic flux path in comparison to models utilizing non-oriented electrical steel. Furthermore, the role of cross-magnetization in performance enhancement is examined through a detailed analysis of the easy axis of GOES. Finally, the superiority of GOES is established through optimal rotor designs based on the type of electrical steel applied.
The interior permanent magnet synchronous motor (IPMSM), widely used in electric vehicles, shows performance variations with temperature, which can impact control accuracy and driving range. Therefore, this article derives the rotor shape of IPMSM to reduce performance deviation under temperature variation. First, the overall operating characteristics of IPMSM in response to temperature variation, such as constant torque curve and maximum torque per ampere trajectories, are analyzed. Second, the effects of temperature on efficiency of IPMSM are investigated. As a result, for reducing rated torque and efficiency deviation caused by temperature changes, the proportion of reluctance torque needs to be increased. Furthermore, the improvement design considering temperature variation are conducted using machine learning based meta models and multi-objective optimization algorithm. Finally, to validate the theoretical analysis and numerical simulations, a prototype is fabricated and tested.
Electric vehicle propulsion motors operate under diverse conditions, with input currents controlled via both maximum torque per ampere (MTPA) and flux-weakening strategies. These variations result in nonlinear behavior in air-gap electromagnetic force harmonics (AEFHs), which can induce undesirable vibrations. Effective mitigation of electromagnetically induced vibrations requires incorporating both the electromagnetic excitation sources and geometry-dependent mechanical responses. Traditionally, this necessitates AEFH reduction techniques in conjunction with coupled electromagnetic-structural analyses, an approach that entails significant computational cost. To address this challenge, we propose a deep neural network-based framework capable of predicting d-q axis flux linkages, AEFHs, and the stator transfer function (TF) from geometric parameters. Magnetic nonlinearity is handled by training separate models for each current combination. For TF, the models learn the maximum magnitude and the corresponding frequency as functions of geometry. These predictions are subsequently integrated to assess both electromagnetic performance and structural response. The proposed approach facilitates efficient and accurate vibration-oriented optimization across various operating conditions while significantly reducing computational demands.
31 October 2022 in Journal of Korean Institute of Intelligent Systems
고농도 미세먼지 발생 빈도가 높아지면서 사회 전반적으로 미세먼지 문제에 대한 관심이 급증하고 있다. 미세먼지 관리의 중요성이 대두되고 있어 체계적인 관리를 위해서는 정확도 높은 미세먼지 예측이 중요하다. 최근 빅데이터와 딥러닝 기술의 발전으로 미세먼지 농도예측과 관련된 다양한 연구가 수행되고 있으며, 주로 시계열 데이터 특성을 반영할 수 있는 RNN, LSTM모델을 활용하고 있다. 대기정체, 국외 유입, 미세먼지 2차 생성 등 다양한 요인이 복합적으로 미세먼지 발생에 영향을 미칠 수 있어 시계열 데이터 특성뿐만 아니라 미세먼지 예측에 영향을 줄 수 있는 변수를 집중적으로 반영한 모델 연구가 필요하다. 본 논문에서는 미세먼지 생성에 영향을 줄 수 있는 요소를 외부요인과 내부요인으로 나누어 고려하고 그 특성을 집중적으로 반영할 수 있는 듀얼어텐션 메커니즘 기반 미세먼지 예측방안을 제안하였다. 본 연구에서 제안한 모델의 예측 성능 및 적합성을 판단하기 위해 실측데이터를 사용하여 시계열 교차검증을 수행하였으며 제안 방법, LSTM, DA-RNN을 통해 시간당 PMSUB2.5/SUB 예측을 하여 MSE를 비교 분석하였다. 예측 결과 MSE는 각각 22.7142, 24.6134, 23.9693로 제안된 모델의 성능이 DA-RNN보다 5.53%, LSTM 보다 8.37% 좋음을 확인하였다.
In the conventional power trunk locking system for vehicles, the mechanical latch is used. However, because the mechanical latch is exposed on the trunk exterior, it is vulnerable to damage during use. Therefore, this article proposes a novel power trunk locking system using electromagnetic force to remove protrusion of conventional trunk locking system. The proposed system consists of contact plate, magnetic module, gear train, and cinching motor. The electromagnetic force from the permanent magnet in the magnetic module is applied to the contact plate attached to the trunk, thereby maintaining the holding force. In this article, firstly, the principle of a proposed magnetic trunk locking system is introduced. Subsequently, the performance of the prototype magnetic module is analyzed using three-dimensional finite element analysis, and further verified by experimental tests. Furthermore, a magnetic equivalent circuit model is developed to derive a design strategy for weight reduction. Finally, design variables for weight reduction of the magnetic module are selected, and weight reduction design is carried out using machine learning based meta model.