8 September 2019 in Advances in Mechanical Engineering
Stick-slip phenomenon in some mechanical structures, especially in machine tools, should be eliminated or inhibited, otherwise the vibration will occur and the position error will inevitably be obtained. In this study, different kinds of surface textures were carried out on the lower samples of the pin-on-disk contact. The starting process of the machine tools was simulated on an Rtec-Multi-Function Tribometer. The stick-slip phenomenon was observed in each kind of samples. However, the stick-slip phenomenon of smooth sample is larger than that of the textured samples. The bulge-textured surface shows excellent anti-stick-slip effect, and the critical stick-slip speed of bulge-textured surface is 95.9% lower than that of the smooth surface. Simultaneously, the anti-stick-slip effect of bulge-textured surface is superior to that of the dent-shaped texturing surface. What’s more, when the amount of lubricating oil is 15 mL, the standard deviation values of friction coefficient and critical speed of stick-slip phenomena (rotational speed when the standard deviation of friction coefficient is abrupt) are the lowest at different rotational speeds. It can be predicted that the bulge textures and adequate amount of lubricating oil (15 mL) can eliminate stick-slip phenomenon when processed in the surface of the machine tool because the bulge textures and adequate amount of lubricating oil can improve frictional state effectively and avoid the slip of the contact surface.
13 April 2020 in Advances in Mechanical Engineering
Solid lubricants have been applied diffusely in numerous domains. This article investigates the impacts of each component in composite solid lubricants on the tribological performance and compares the antifriction effects of different kinds of solid lubricants to solve the lubrication problem of sliding bearing. Surface textures with dimples were fabricated on the surfaces of GCr15 bearing steel by a Q-switched solid-state Nd:YAG laser. The composite solid lubricants were filled in the micro-dimples by the deposition processes of heat-maintaining and pressure-maintaining, consisting of blinding elements and lubricating elements. Tribological performances under sliding friction for different kinds of adhesives and lubricants with different grain sizes were evaluated by ring-on-disk tribometer. On this basis, an orthogonal experiment of four factors and three levels (34) was designed to investigate the impacts of different components of the solid lubricants on the tribological performance. Solid lubricants with nanoparticles can enhance antifriction ability: the friction coefficient of nano-graphite is 18.9% lower than that of micron-graphite, and the friction coefficient of nano-sized molybdenum disulfide declines 7.6% comparing to that of micron-sized molybdenum disulfide. According to the results of the orthogonal experiment, the optimal formula of the composite solid lubricants was graphite:molybdenum disulfide:polyimide:carbon nano-tubes = 4:1:0.5:0.4.
1 April 2021 in Journal of Laser Micro/Nanoengineering