10 August 2022 in Applied Radiation and Isotopes
Carbon oxygen ratio (C/O) logging has great importance in the accurate determination of hydrocarbon saturation in the reservoir region. This measurement is independent of the salinity of the formation water, unlike alternative logging methods. Analysis of the measurement requires modelling of the time-dependent coupled neutron-gamma field produced by the tool, which is most efficiently done by the Monte Carlo (MC) method. MC simulation can be used to generate the gamma spectrum at the detectors of the probe for a variety of rock physics conditions and borehole environments and thus the C/O can be determined by the processing of the simulated gamma spectrum. The simulation results are used to derive the interpretation diagrams for the basic petrophysical effects and to investigate the role of the side effects. Considering the industrial practice of log evaluation, the resolution and limitations of the method is quantified in the measurement space by defining a goodness factor based on the area of the interpretation chart. The focus of this paper is on detector arrangement, but it also covers the effect of porosity, lithology, and the casing.
8 August 2025 in Journal of Applied Physics
In recent years, there has been continuous development of muographic instruments at the HUN-REN Wigner RCP, including hardware and software. In addition, field testing was performed at several underground sites, looking for new geological understanding. Transferring the particle detector technology from the laboratory to real field conditions presented many surprises and problems to solve, and despite significant progress, there are still newer and newer challenges to overcome. In this article, we summarize recent developments and show examples of results of field measurements carried out in both Hungary and other countries. As of now, muography projects are being carried out in five countries with more than ten detectors, offering promising new insights. This article is based on the presentation given by the corresponding author at the 2024 Muography Workshop held in Santa Fe, NM, USA.
21 September 2022 in Acta Geodaetica et Geophysica
6 December 2025 in Gas Science and Engineering
12 February 2021 in Acta Geodaetica et Geophysica
Before performing the inversion process, the original measured data set is often transformed (corrected, smoothed, Fourier-transformed, interpolated etc.). These preliminary transformations may make the original (statistically independent) noisy measurement data correlated. The noise correlation on transformed data must be taken into account in the parameter fitting procedure (inversion) by proper derivation of likelihood function. The covariance matrix of transformed data system is no longer diagonal, so the likelihood based metrics, which determines the fitting process is also changed as well as the results of inversion. In the practice, these changes are often neglected using the “customary” estimation procedure (simple least square method) resulting wrong uncertainty estimation and sometimes biased results. In this article the consequence of neglected correlation is studied and discussed by decomposing the inversion functional to “customary” and additional part which represents the effect of correlation. The ratio of two components demonstrates the importance and justification of the inversion method modification.