Nanoparticle synthesis gets a shock: Nanoparticles are useful in a wide range of applications such as catalysis, imaging, and energy storage. Yaoet al.developed a method for making nanoparticles with up to eight different elements (see the Perspective by Skrabalak). The method relies on shocking metal salt-covered carbon nanofibers, followed by rapid quenching. The “carbothermal shock synthesis” can be tuned to select for nanoparticle size as well. The authors successfully created PtPdRhRuCe nanoparticles to catalyze ammonia oxidation.Science, this issue p.1489; see also p.1467
This work investigates the reaction dynamics of metastable intermolecular composites through high speed spectrometry, pressure measurements, and high-speed color camera pyrometry. Eight mixtures including Al/CuO and Al/Fe2O3/xWO3 (x being the oxidizer mol. %) were reacted in a constant volume pressure cell as a means of tuning gas release and adiabatic temperature. A direct correlation between gas release, peak pressure, and pressurization rate was observed, but it did not correlate with temperature. When WO3 was varied as part of the stoichiometric oxidizer content, it was found that Al/Fe2O3/70% WO3 achieved the highest pressures and shortest burn time despite a fairly constant temperature between mixtures, suggesting an interplay between the endothermic Fe2O3 decomposition and the higher adiabatic flame temperature sustained by the Al/WO3 reaction in the composite. It is proposed that the lower ignition temperature of Al/WO3 leads to the initiation of the composite and its higher flame temperature enhances the gasification of Fe2O3, thus improving advection and propagation as part of a feedback loop that drives the reaction. Direct evidence of such gas release promoting reactivity was obtained through high speed pyrometry videos of the reaction. These results set the stage for nanoenergetic materials that can be tuned for specific applications through carefully chosen oxidizer mixtures.
A homogeneous coating of Fe3O4 on in situ–generated nanoaluminum was accomplished by thermal decomposition of Fe(CO)5 in an aluminum aerosol stream and subsequent oxidation of iron by air bleed. X-ray photoelectron spectroscopy (XPS) investigation revealed that oxygen penetrated through this coating, and Fe3O4 facilitated the formation of an expanded aluminum oxide layer compared to an uncoated aluminum case. Closed cell combustion tests displayed a minor decrease in pressure response for the coated product, which was attributed to the increased aluminum oxide layer. The critical ignition temperature was reduced for the coated product in T-jump fine-wire combustion tests.