17 July 2020 in IEEE Transactions on Power Electronics
Utilizing the electromagnetic interference (EMI) filters is a major approach to reduce the conducted emissions from the power electronic converters. These filters enlarge the total volume and weight of the system. Many works have been done to integrate the filter components. In this paper a new integrated choke with certain winding structure, consists of two core, a toroid, and a solenoid is presented. Although, the DM inductance of the proposed choke could be independently increased by designing the windings, the CM inductance value remains almost constant as the conventional choke. Theoretical analysis for modelling the choke and prediction of the inductances and saturation conditions is provided. Experimental measurements validate the analysis, and show a good filtering performance with rejecting conducted noise from an induction motor drive system while it decreases the overall filter size.
22 February 2021 in IEEE Transactions on Magnetics
This article proposes a scannable leaky-wave antenna (LWA). The antenna consists of a ferrite-blade waveguide with a longitudinal slot on the upper wall, which has a tunable composite right-/left-handed (CRLH) property. The left-handed (LH) behavior of this structure is based on the negative effective permeability of the ferrite material and the negative effective permittivity of the waveguide excited below its cutoff frequency. First, based on the modal analysis and calculated dispersion relation, the unbalanced CRLH response of the ferrite-blade waveguide is investigated. Second, an LWA is presented by using a longitudinal slot on the upper wall of the proposed ferrite-blade waveguide, where the tunable balance CRLH response is achieved and analyzed by the transverse resonance method (TRM). The proposed LWA can provide backward, broadside, and forward radiations by a change in the operation frequency or the magnetic bias, independently. The given results show a +59° to −57° sweep in the radiation beam when the magnetic bias of the ferrite changed from 1400 to 1600 Oe at the sampling frequency of 6.4 GHz. Moreover, the results show that the frequency tuning range is more than 600 MHz (6.2–6.8 GHz). The peak gain and efficiency of the proposed antenna are 7.1 dBi and 78.5% at 6.6 GHz, respectively.
15 August 2019 in Waves in Random and Complex Media
In this paper, a new metamaterial structure that consists of a normally magnetized ferrite-filled rectangular waveguide with a long slot on the center of the broad wall is proposed. The analytical dispersion relation for this structure is derived through the transverse resonance method (TRM). The unique dispersion properties, such as the inherent balanced composite right/left-handed (CRLH) response and its magnetically tunable behavior, are studied and validated by some simulated results. As an application of the proposed metamaterial structure, a magnetically backfire-to-endfire scanning leaky-wave antenna (LWA) that is capable of both fixed-bias frequency scanning and fixed-frequency bias scanning is presented. Based on the simulated results, by changing the magnetic DC bias of the ferrite in range of 1192–1336 Oe, the radiation pattern of the proposed LWA can be scanned from about 52 to −54 degrees. The main advantages of the proposed structure in comparison to previous metamaterial LWAs consist of ease of design and fabrication and no use of any mechanical or electrical switches.
4 October 2021 in Waves in Random and Complex Media
In this paper, a ferrite-filled rectangular waveguide as a balanced composite right/left-handed (CRLH) transmission line is considered. Based on the surface current density of dominant mode, a centerline longitudinal slot on the broad wall of this ferrite-filled rectangular waveguide can be radiate to the free space as a leaky-wave antenna (LWA). This proposed LWA has the both capability of the fixed-bias frequency scanning and fixed-frequency bias scanning from negative to positive angles. However, the gain of the centerline slotted ferrite-filled rectangular waveguide antenna is not acceptable. By adding another slot and changing the position of slots on the broad wall, the gain is improved to more than 9 dB in frequency range of 6.59–6.69 GHz.
3 August 2020 in Waves in Random and Complex Media
This paper proposes a new unbalance composite right/left handed (CRLH) transmission line that consists of a normally magnetized ferrite-loaded rectangular waveguide. The left-handed (LH) behavior of this structure is based on the negative effective permeability of the ferrite material and the negative effective permittivity of the hollow metallic waveguide at the frequencies below the cutoff. By increasing the frequency and passing through the cutoff frequency, this structure behaves as a right handed (RH) transmission line. As a main advantage of the proposed structure, the CRLH response of this transmission line can be tuned by changing the magnetic bias of the ferrite layer. This tunable CRLH transmission line can be used to design a tunable microwave filter or a tunable leaky wave antenna (LWA) with backfire-to-endfire scanning capability. Compare to previous CRLH metamaterial structures, the proposed structure has an easy design and a wide frequency range of tunability.
4 January 2019 in AEU - International Journal of Electronics and Communications