Light scattering is a fundamental property that can be exploited to create essential devices such as particle analysers. The most common particle size analyser relies on measuring the angle-dependent diffracted light from a sample illuminated by a laser beam. Compared to other non-light-based counterparts, such a laser diffraction scheme offers precision, but it does so at the expense of size, complexity and cost. In this paper, we introduce the concept of a new particle size analyser in a collimated beam configuration using a consumer electronic camera and machine learning. The key novelty is a small form factor angular spatial filter that allows for the collection of light scattered by the particles up to predefined discrete angles. The filter is combined with a light-emitting diode and a complementary metal-oxide-semiconductor image sensor array to acquire angularly resolved scattering images. From these images, a machine learning model predicts the volume median diameter of the particles. To validate the proposed device, glass beads with diameters ranging from 13 to 125 µm were measured in suspension at several concentrations. We were able to correct for multiple scattering effects and predict the particle size with mean absolute percentage errors of 5.09% and 2.5% for the cases without and with concentration as an input parameter, respectively. When only spherical particles were analysed, the former error was significantly reduced (0.72%). Given that it is compact (on the order of ten cm) and built with low-cost consumer electronics, the newly designed particle size analyser has significant potential for use outside a standard laboratory, for example, in online and in-line industrial process monitoring.
Current diagnostics of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection heavily rely on reverse transcription-polymerase chain reaction (RT-PCR) or on rapid antigen detection tests. The former suffers from long time-to-result and high cost while the latter from poor sensitivity. Therefore, it is crucial to develop rapid, sensitive, robust, and inexpensive methods for SARS-CoV-2 testing. Herein, we report a novel optofluidic technology, a flow-virometry reader (FVR), for fast and reliable SARS-CoV-2 detection in saliva samples. A small microfluidic chip together with a laser-pumped optical head detects the presence of viruses tagged with fluorescent antibodies directly from saliva samples. The technology has been validated using clinical samples with high sensitivity (91.2%) and specificity (90%). Thanks also to its short time-to-result (<30 min) and small size (25 × 30 × 13 cm), which can be further reduced in the future, it is a strong alternative to existing tests, especially for point-of-care (POC) and low resource settings.
Touch-enabled technologies, from smartphones to public kiosks, are ubiquitous, yet frequent use turns their surfaces into reservoirs for microbial contamination. Routine alcohol-based cleaning can be impractical on high-touch optical surfaces due to damage risk and usability concerns. Here, we present a scalable approach to transparent, mechanically robust glass surfaces by embedding materials with ad hoc functionality into surface glass nanoholes. We demonstrate the concept with copper nanodisks: copper is an established antimicrobial agent, but its wear susceptibility pose challenges for use on transparent displays. Our design shields the functional material from lateral wear while allowing ion diffusion for antimicrobial efficacy. Fabrication uses only wafer-compatible, lithography-free steps: thermal dewetting of a thin silver film to create a nanosized mask; inverting it to a polymer nanoholes mask by etching the silver nanoparticles; wet etching of the glass to form nanoholes; selective copper deposition inside these holes; and liftoff of excess material. The resulting surfaces exhibit mean transmission of 80%–85% in the 380–750 nm range with haze <1% and minimal color shift, compared to uncoated glass. Antimicrobial efficacy, assessed against Escherichia coli OP50 under a modified U.S. EPA protocol, shows ≈99% bacterial reduction within one hour. Abrasion tests with a crockmeter simulating finger swipes confirm that the embedded copper remains intact, with no measurable change in optical performance. This embedded design provides a scalable route to integrate antimicrobial functionality into high-touch transparent systems while preserving optical clarity and wear resistance, with potential relevance for medical, consumer, and transportation interfaces.
Spectroscopic micro-computed tomography using photon counting detectors is a technology that promises to deliver material-specific images in pre-clinical research. Inherent to such applications is the need for a high spatial resolution, which can only be achieved with small focal spot sizes in the micrometer range. This limits the achievable x-ray fluxes and implies long acquisitions easily exceeding one hour, during which it is paramount to maintain a constant detector response. Given that photon-counting detectors are delicate systems, with each pixel hosting advanced analog and digital circuitry, this can represent a challenging task. In this contribution, we illustrate our findings on how to reduce image artifacts in computed tomography reconstructions under these conditions, using a Medipix3RX detector featuring a cadmium telluride sensor. We find that maintaining a constant temperature is a prerequisite to guarantee energy threshold stability. More importantly, we identify varying sensor leakage currents as a significant source to artifact formation. We show that these leakage currents can render the corresponding images unusable if the ambient temperature fluctuates, as caused by an air conditioning, for example. We conclude with demonstrating the necessity of an adjustable leakage current compensation.