4 May 2023 in Nature Electronics
26 November 2025 in Nature
11 March 2024 in IEEE Transactions on Electron Devices
In this work, we report a planar Si-based ferroelectric field-effect transistor (FEFET) characterized by a high memory window (MW) of 4.79 V, ten-year retention, and pass disturb-free characteristics. This achievement is realized through the use of a 20-nm-thick laminated Hf $_{\text{0}.\text{5}}$ Zr $_{\text{0}.\text{5}}$ O $_{\text{2}}$ (L-HZO) film with Al $_{\text{2}}$ O $_{\text{3}}$ (AO)-insertion layers (ILs). The 2.4-Å-thick AO-ILs effectively severed the bulk-HZO film and scaled down each FE-thickness ( $\textit{t}_{\text{FE}}\text{)}$ in the L-HZO. This resulted in suppression of non-FE monoclinic phase formation to less than 10%, and more notably, an increase in the coercive field ( $\textit{E}_{\textit{C}}\text{)}$ within the FE stack. With an increase in the number of HZO-lamination ( $\textit{N}_{\text{HZO}}\text{)}$ , the $\textit{E}_{\textit{C}}$ was enhanced by 76% in L-HZO ( $\textit{N}_{\text{HZO}}$ $=$ 4) compared to single-HZO (S-HZO). This led to an increase in effective polarization ( $\textit{P}_{\text{eff}}\text{)}$ , representing the portion of remnant polarization ( $\textit{P}_{\text{r}}\text{)}$ uncompensated by channel-injected charge, thereby validly influencing the threshold voltage ( $\textit{V}_{\text{T}}\text{)}$ shift of FEFET. The augmented $\textit{P}_{\text{eff}}$ in L-HZO (350% increase compared to S-HZO) was directly confirmed through a more pronounced $\textit{V}_{\text{T}}$ shift by the change of $\textit{P}_{\text{r}}$ , which was 230% steeper in L-HZO compared to S-HZO. The revealed mechanism behind the enhanced MW and reliability in laminated-FE, stemming from the increased $\textit{P}_{\text{eff}}$ rooted in enlarged $\textit{E}_{\textit{C}}$ , paves the way for designing the FE-stack for high-density memory or neuromorphic applications.
27 November 2023 in Applied Physics Letters
In this study, we present an analytical equation for describing the memory window of ferroelectric field-effect transistors (FeFETs). The analytical equation is derived based on the effect of oxide charge on the threshold voltage shift of the field-effect transistor and can be expressed by simpler parameters, such as the quantity of polarization switching and trapped charge. We demonstrate that the derived equation is in quantitative agreement with the results of the numerical calculations using a technology computer-aided design simulation tool, which confirms the validity of the equation. Our results show that the analytical equations provide an accurate and practical description of the memory window for FeFETs with various structures.
1 August 2012 in Synthetic Metals
3 November 2025 in IEEE Electron Device Letters
We present a ferroelectric NAND (FENAND) design that steepens the incremental step pulse programming (ISPP) slope and enhances reliability via a laminated FE stack. The laminate incorporates a 3 Å Al2O3 interlayer at the mid-plane of a 15 nm HfZrO2 film. This structural modification reshapes the polarization-voltage loop, yielding a 25 % increase in coercive voltage (VC) and a 19 % reduction in remnant polarization (Pr). Consequently, the ISPP slope improved by 16 %. The improvement stems from two effects: (1) Before switching, higher VC delays FE reversal, allowing more program voltage (VPGM) to drop across the gate insulator (G.IL), strengthening the field and boosting gate-side injection. (2) After switching, reduced Pr lowers the compensation charge at the channel interface, suppressing channel-side injection. Lowering charge injection through channel insulator (Ch.IL) during write, without sacrificing memory window (MW), mitigates dielectric stress, achieving 10-year retention and endurance up to 106 cycles. This FE stack design provides practical guidelines for scaling VPGM and spacer dimensions in high-density 3D FENAND.