11 March 2024 in Advanced Materials
Ionic liquids and their various analogues are without doubt the scientific sensation of the last few decades, paving the way to a more sustainable society. Their versatile suite of properties, originating from an almost inconceivably large number of possible cation and anion combinations, allows tuning of the structure to serve a desired purpose. Ionic liquids hence offer a myriad of useful applications from solvents to catalysts, through to lubricants, gas absorbers, and azeotrope breakers. The purpose of this review is to explore the more unexpected of these applications, particularly in the energy space. It guides the reader through the application of ionic liquids and their analogues as i) phase change materials for thermal energy storage, ii) organic ionic plastic crystals, which have been studied as battery electrolytes and in gas separation, iii) key components in the nitrogen reduction reaction for sustainable ammonia generation, iv) as electrolytes in aluminum‐ion batteries, and v) in other emerging technologies. It is concluded that there is tremendous scope for further optimizing and tuning of the ionic liquid in its task, subject to sustainability imperatives in line with current global priorities, assisted by artificial intelligence.
21 February 2022 in Energy & Environmental Science
Future rechargeable Li metal batteries (LMBs) require a rational electrolyte design to stabilize the interfaces between the electrolyte and both the lithium metal anode and the high voltage cathode. This remains the greatest challenge in achieving high cycling performance in LMBs. We report an ether-aided ionic liquid electrolyte which offers superior Li metal deposition, high voltage (5 V) stability and non-flammability. High performance cycling of LiNi0.8Mn0.1Co0.1O2 (4.4 V) and LiNi0.6Mn0.2Co0.2O2 (4.3 V) cells is demonstrated with high coulombic efficiency (>99.5%) at room temperature and elevated temperatures, even at high practical areal capacity for the latter of 3.8 mA h cm−2 and with a capacity retention of 91% after 100 cycles. The ether-ionic liquid chemistry enables desirable plated Li microstructures with high packing density, minimal ‘dead’ or inactive lithium formation and dendrite-free long-term cycling. Along with XPS studies of cycled electrode surfaces, we use molecular dynamics simulations to demonstrate that changes to the electrolyte interfacial chemistry upon addition of DME plays a decisive role in the formation of a compact stable SEI.
14 August 2021 in Advanced Energy Materials
The atmospheric instability and the corrosive tendency of hexafluorophosphate [PF6]− and fluorosulfonylimide [FSI]− based lithium salts, respectively, are among the major impediments towards their application as electrolytes in high voltage lithium batteries. Herein a new class of Li salts is introduced and their electrochemical behavior is explored. The successful synthesis and characterization are reported, including the crystal structure, of lithium 1,1,1,3,3,3‐(tetrakis)hexafluoroisopropoxy borate (LiBHfip). The oxidative stability of electrolytes of this salt in an ethylene carbonate:dimethyl carbonate mixture (v/v, 50:50) is found to be 5.0 V versus Li+/Li on various working electrodes, showing substantial improvement over a LiPF6 based electrolyte. Moreover, a high stability of an aluminum substrate is observed at potentials up to 5.8 V versus Li+/Li; in comparison, a LiFSI based electrolyte shows prominent signs of Al corrosion above 4.3 V versus Li+/Li. Cells tested with high voltage layered LiNi0.8Mn0.1Co0.1O2 (NMC811) and spinel LiMn2O4 (LMO) cathodes show stable cycling over 200 cycles with capacity retention of 76% and 90%, respectively. The LMO|Li cell maintains this same low capacity fade rate for 1000 cycles even after the salt has been exposed for 24 h to atmospheric conditions (water content ≈0.57 mass%).
20 August 2020 in Journal of Materials Chemistry A
We explore a superconcentrated electrolyte comprising N -propyl- N -methylpyrrolidinium bis(fluorosulfonyl)imide, 1,2 dimethoxyethane and 3.2 mol kg −1 LiFSI. It offers an alternative ion-transport mechanism, improved fluidity and ultra-stable Li metal battery performance.
5 April 2018 in Dalton Transactions
The thermolytic decomposition of ammonia borane (AB) is known to proceed through the polymeric coupling reaction between –BH3 and –NH3 sites of multiple ammonia borane molecules, which results in the release of hydrogen and other by-products, e.g., ammonia, diborane and borazine.
1 May 2018 in International Journal of Hydrogen Energy