We demonstrate a swift ion-beam irradiation procedure based on electronic (not nuclear) excitation to generate a large index jump step-like optical waveguide (Δn0≈0.2,Δne≈0.1) in LiNbO3. The method uses medium-mass ions with a kinetic energy high enough to assure that their electronic stopping power Se(z) reaches a maximum value close to the amorphous (latent) track threshold inside the crystal. Fluorine ions of 20 and 22MeV and fluences in the range (1–30)×1014 are used for this work. A buried amorphous layer having a low refractive index (2.10 at a wavelength of 633nm) is then generated at a controlled depth in LiNbO3, whose thickness is also tuned by irradiation fluence. The layer left at the surface remains crystalline and constitutes the core of the optical waveguide which, moreover, is several microns far from the end of the ion range. The waveguides show, after annealing at 300°C, low propagation losses (≈1dB∕cm) and a high second-harmonic generation coefficient (50%–80% of that for bulk unirradiated LiNbO3, depending on the fluence). The formation and structure of the amorphous layer has been monitored by additional Rutherford backscattering/channeling experiments.
We study the feasibility of femtosecond laser writing of optical waveguides in bulk glass, motivated by the extended transparency interval of heavy metal oxide glasses in the mid-infrared regime. Its large linear and nonlinear refractive indices cause critical self-focusing to occur even at low laser energies, leading to filamentary propagation and material damage. However, the vicinity of the laser-damaged region shows a considerable increase in the refractive index, which we attribute to a collateral, stress-induced densification due to the high pressures generated in the focal region. These regions of increased refractive index are strongly birefringent and sufficiently large to support efficient light propagation in transversally written structures. Optical waveguides with a refractive index increase and minimal mode ellipticity have been obtained.
A novel method to produce optical waveguides is demonstrated for lithium niobate . It is based on electronic excitation damage by swift ions, i.e., with energies at approximately or above. The new technique uses high-energy medium-mass ions, such as Cl, with electronic stopping powers above the threshold value for amorphization , reaching the maximum value a few micrometers inside the crystal. At the ultralow fluence regime an effective nanostructured medium is obtained that behaves as an optical waveguide where light propagates transversally to the amorphous nanotracks created by every single impact. The method implies a reduction of 4 orders of magnitude with respect to He implantation. The optical waveguides present reasonable losses and significant second-harmonic generation (SHG) and electro-optic (EO) responses ( bulk) for the lowest fluences.
1 August 2006 in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
The formation of buried heavily damaged and amorphous layers by a variety of swift-ion irradiations (F at 22MeV, O at 20MeV, and Mg at 28MeV) on congruent LiNbO3 has been investigated. These irradiations assure that the electronic stopping power Se(z) is dominant over the nuclear stopping Sn(z) and reaches a maximum value inside the crystal. The structural profile of the irradiated layers has been characterized in detail by a variety of spectroscopic techniques including dark-mode propagation, micro-Raman scattering, second-harmonic generation, and Rutherford backscattering spectroscopy∕channeling. The growth of the damage on increasing irradiation fluence presents two differentiated stages with an abrupt structural transition between them. The heavily damaged layer reached as a final stage is optically isotropic (refractive index n=2.10, independent of bombarding ion) and has an amorphous structure. Moreover, it has sharp profiles and its thickness progressively increases with irradiation fluence. The dynamics under irradiation of the amorphous-crystalline boundaries has been associated with a reduction of the effective amorphization threshold due to the defects created by prior irradiation (cumulative damage). The kinetics of the two boundaries of the buried layer is quite different, suggesting that other mechanisms aside from the electronic stopping power should play a role on ion-beam damage.