Bao-Yi Yu

Bao-Yi Yu

Auto-generated profile, based on publicly available information

Bao-Yi Yu

School of Material Science and Engineering, Shenyang University of Technology, Shenyang 110870, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
JHJianfei Hao
Jianfei Hao
BYBaoyi Yu
Baoyi Yu
JBJiancong Bian
Jiancong Bian
BCBin Chen
Bin Chen
WHWu Huishu
Wu Huishu
RLRunxia Li
Runxia Li
In order to investigate the effect of Mg2Si formation on the microstructure and properties of an Al−Si alloy, the critical point of a hypereutectic Al−17Si−4Cu−Mg alloy was calculated by Pandat software. The calculation results of the equilibrium phase diagram show that the critical point for Mg2Si phase formation for the alloy was obtained when the Mg content was 2.2%. The contents of 0.5 wt.% Mg and 2.5 wt.% Mg were selected as the research object. The content of Mg increased from 0.5 wt.% to 2.5 wt.%, the eutectic Si in the matrix was reduced, and the Chinese character-like Mg2Si phase appeared in the microstructure. In the peak ageing state, in addition to θ″ and Q′ phases that were mainly precipitated, there was also needle-like β″ precipitation in the 2.5 wt.% Mg content alloy. Larger precipitates were found in 2.5 wt.% content alloys, mainly due to the promotion of the solid solution having the aggregation and segregation of more solute elements in the matrix. The tensile strength, elongation, and hardness of hypereutectic Al−17Si−4Cu−0.5Mg alloy under peak ageing were 331 MPa, 3.11%, and 152.1 HB, respectively. The tensile strength and the elongation decreased while the hardness increased with the 2.5 wt.% Mg content, which is due to the formation of hard and brittle Mg2Si and Al8FeMg3Si, which has a splitting effect on the matrix.

4 May 2022 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
SLShu-Ning Lyu
Shu-Ning Lyu
LZLi Zheng
Li Zheng
DCDong-Xu Chang
Dong-Xu Chang
BYBao-Yi Yu
Bao-Yi Yu

1 September 2017 in Journal of Iron and Steel Research International
Verified
Journal Article
Closed access
PDF file
YSYuan-Ji Shi
Yuan-Ji Shi
LLLan-Ji Liu
Lan-Ji Liu
LZLei Zhang
Lei Zhang
LZLi-Jun Zhang
Li-Jun Zhang
LZLi Zheng
Li Zheng
BYBao-Yi Yu
Bao-Yi Yu

30 August 2023 in International Journal of Fatigue
Verified
Journal Article
Closed access
BYBoning Yu
Boning Yu
YLYuming Li
Yuming Li
BABoussad ABBES
Boussad ABBES
SLShujun Li
Shujun Li
BYBaoyi Yu
Baoyi Yu

1 May 2018 in China Foundry
Verified
Journal Article
Open access
PDF file
XZXue-Feng Zhu
Xue-Feng Zhu
BYBao-Yi Yu
Bao-Yi Yu
LZLi Zheng
Li Zheng
BYBo-Ning Yu
Bo-Ning Yu
QLQiang Li
Qiang Li
HZHao Zhang
Hao Zhang
Pouring position as the input heat source has great influence on the temperature field evolution. In this study, the Flow3D simulation software was applied to investigate the influence of pouring methods (with fixed or moving pouring channel) on AZ91 Mg alloy horizontal centrifugal casting (HCC) process. The simulation results show that the moving pouring channel method can effectively increase the cooling rate and formability of casting pipe. The casting experiment shows that an AZ91 Mg alloy casting pipe with homogeneous microstructure and clear contour was obtained by the moving pouring channel method, and the grain size of the casting pipe is significantly decreased. Meanwhile, serious macro-segregation appeared in the AZ91 casting pipe by the fixed pouring channel HCC process. Compared with the fixed pouring channel, the moving pouring channel can remarkably improve the ultimate tensile strength and elongation of the AZ91 HCC pipe from 142.2 MPa to 201.5 MPa and 6.2% to 6.7%, respectively.