9 September 2023 in Journal of Building Engineering
3 July 2020 in Waste and Biomass Valorization
22 April 2020 in Sustainable Environment Research
DCDiana M. Caicedo-Concha
+1
The optimization of degradation processes and the management of leachate and biogas produced in landfills are key aspects for the establishment of more sustainable municipal solid waste (MSW) disposal in developing countries. In this study, biochemical methane potential (BMP) tests were used to evaluate CH4 production potential and degradation kinetics of fresh waste (FW) and five-year aged excavated waste (EW) samples from a tropical controlled landfill with compositional characteristics of developing countries. BMP tests with reconstituted samples of the biodegradable fraction of both MSW types were performed at three substrate/inoculum (S/I) ratios (0.3, 0.5 and 1.0 g VS substrate g− 1 VS inoculum), and CH4 generation parameters were determined using the first-order and modified Gompertz kinetic models. After 30-d, the best BMP results were reached at S/I ratios of 0.5 and 1.0, with cumulative CH4 productions of 528 and 433 mL CH4 g− 1 VS for FW, respectively; and 151 and 135 mL CH4 g− 1 VS for EW, respectively. The first-order kinetic model provided a good fit to BMP results for FW, whereas the modified Gompertz model showed a better adjustment to the BMP data for EW. Calculated first-order CH4 generation rates for FW and EW were in the range 0.19–0.36 and 0.23–0.25 d− 1, respectively. These results evidence the high biodegradability and CH4 potential of FW disposed of in a tropical landfill in Colombia and the reduced BMP of EW despite a relatively short period after disposal under conventional landfill operation conditions.
27 November 2021 in Waste and Biomass Valorization
1 January 2020 in Cogent Engineering
The anaerobic digestion (AD) of food waste (FW) has been recognised as a low-cost and high-efficiency alternative that mitigates the impacts of the final disposal of FW, while facilitating the production of high value-added by-products, such as biogas and digestate. In this study, the simultaneous incidence of two significant variables in the AD of FW were evaluated: the temperature (20, 35 and 55 °C), which affects the kinetics of the process, and the head space (20, 35 and 50%), which can affect the pH and therefore the biochemical methane potential (BMP). A composite central design was used, and response surface methodology (RSM) and kinetic models (the first-order and Gompertz models) were used to analyse the process. At higher temperatures and smaller head spaces, inhibition phenomena were reduced by the consumption of bicarbonate alkalinity and decreasing the pH, resulting in a higher process performance. The optimal conditions were a temperature of 48.9°C and a head space of 20%. The Gompertz kinetic model fit the process dynamics better and with a lower error than the first-order model.