1 January 2018 in Construction and Building Materials
27 March 2017 in Journal of Applied Microbiology
Characterization of alkaliphilic Bacillus species for spore production and germination and calcite formation as a prelude to investigate their potential in microcrack remediation in concrete. Conditions, extent and timing of endospore production was determined by dark-field light microscopy; germination induction and kinetics were assessed by combining reduction in optical density with formation of refractile bodies by phase-contrast microscopy. Bacillus pseudofirmus was selected from several species as the most suitable isolate. Levels and timing of calcium carbonate precipitated in vitro by B. pseudofirmus were evaluated by atomic absorption spectroscopy and structural identity confirmed as calcite and aragonite by Raman spectroscopy and FTIR. The isolate produced copious spores that germinated rapidly in the presence of germinants l-alanine, inosine and NaCl. Bacterial cells produced CaCO3 crystals in microcracks and the resulting occlusion markedly restricted water ingress. By virtue of rapid spore production and germination, calcium carbonate formation in vitro and in situ, leading to sealing of microcracks, B. pseudofirmus shows clear potential for remediation of concrete on a commercial scale. Microbial sealing of microcracks should become a practicable and sustainable means of increasing concrete durability.
1 January 2013 in Procedia Engineering
The quality of concrete used in current and past 20 construction projects were examined based mainly on the concrete compressive strength achieved. The projects are different in nature and are at various levels of completeness. In Libya, concrete compressive strength was usually obtained from test results of a 150mm standard cube mold. Data collected from all 20 projects showed that the 28-day concrete compressive strength follow in general Normal Distribution pattern. The study dealt with concrete quality aspects such as: quality control, strength range, data standard deviation, data scatter, and ratio of minimum strength to design strength. Site quality control for these projects ranged from very good to poor according to ACI214 criteria. The ranges (Rg) of the strength (max. strength – min. strength) divided by average strength are from 34% to 160%. Data scatter is measured as the range (Rg) divided by standard deviation (σ) and is found to be (1.82 to 11.04), indicating that the range is ±3σ. In lieu of national unified procedure, international construction companies working in Libya are free to use the assessment criteria for concrete compressive strength that suit them. Therefore, the study reveals that concrete quality assessments conducted by these construction companies usually meet their adopted (internal) standards, but sometimes fail to meet internationally known standard requirements. The assessment of concrete presented in this paper is based on ACI, British standards and proposed Libyan concrete strength assessment criteria
1 January 2014 in IOSR Journal of Mechanical and Civil Engineering