24 January 2014 in Journal of Applied Physics
We demonstrate a technique by which erosion of the acceleration channel in Hall thrusters can be reduced by at least a few orders of magnitude. The first principles of the technique, now known as “magnetic shielding,” have been derived based on the findings of 2-D numerical simulations. The simulations, in turn, guided the modification of an existing 6-kW laboratory Hall thruster to test the theory and are the main subject of this Part I article. Part II expands on the results of the experiments. Near the walls of the magnetically shielded (MS) thruster theory and experiment agree that (1) the plasma potential has been sustained at values near the discharge voltage, and (2) the electron temperature has been lowered compared to the unshielded thruster. Erosion rates deduced directly from the wall probes show reductions of at least ∼3 orders of magnitude at the MS inner wall when an ion energy threshold of 30.5 V is used in the sputtering yield model of the channel material. At the outer wall the probes reveal that the ion energy was below the assumed threshold. Using a threshold of 25 V, the simulations predict a minimum reduction of ∼600 at the MS inner wall. At the MS outer wall ion energies are found to be below 25 V. When a 50-V threshold is used the computed ion energies are below the threshold at both sides of the channel. Uncertainties, sensitivities, and differences between theory and experiment are also discussed. The elimination of wall erosion in Hall thrusters solves a problem that has remained unsettled for more than five decades.
1 March 2011 in Physics of Plasmas
In a qualification life test of a Hall thruster it was found that the erosion of the acceleration channel practically stopped after . Numerical simulations using a two-dimensional axisymmetric plasma solver with a magnetic field-aligned mesh reveal that when the channel receded from its early-in-life to its steady-state configuration the following changes occurred near the wall: (1) reduction of the electric field parallel to the wall that prohibited ions from acquiring significant impact kinetic energy before entering the sheath, (2) reduction of the potential fall in the sheath that further diminished the total energy ions gained before striking the material, and (3) reduction of the ion number density that decreased the flux of ions to the wall. All these changes, found to have been induced by the magnetic field, constituted collectively an effective shielding of the walls from any significant ion bombardment. Thus, we term this process in Hall thrusters “magnetic shielding.”
28 January 2014 in Journal of Applied Physics
The physics of magnetic shielding in Hall thrusters were validated through laboratory experiments demonstrating essentially erosionless, high-performance operation. The magnetic field near the walls of a laboratory Hall thruster was modified to effectively eliminate wall erosion while maintaining the magnetic field topology away from the walls necessary to retain efficient operation. Plasma measurements at the walls validate our understanding of magnetic shielding as derived from the theory. The plasma potential was maintained very near the anode potential, the electron temperature was reduced by a factor of two to three, and the ion current density was reduced by at least a factor of two. Measurements of the carbon backsputter rate, wall geometry, and direct measurement of plasma properties at the wall indicate that the wall erosion rate was reduced by a factor of 1000 relative to the unshielded thruster. These changes effectively eliminate wall erosion as a life limitation in Hall thrusters, enabling a new class of deep-space missions that could not previously be attempted.
14 January 2013 in Applied Physics Letters
We demonstrate by numerical simulations and experiments that the unmagnetized ion beam formed in a Hall thruster can be controlled by an applied magnetic field in a manner that reduces by 2–3 orders of magnitude deleterious ion bombardment of the containing walls. The suppression of wall erosion in Hall thrusters to such low levels has remained elusive for decades.
1 July 2006 in Journal of Propulsion and Power
1 July 2006 in Journal of Propulsion and Power
A laboratory-model Hall thruster with a magnetic circuit designed for high-specific impulse (2000-3000 s) was evaluated to determine how current density and magnetic field affect thruster operation. Results have shown for the first time that a minimum current density and optimum magnetic field shape exist at which efficiency will monotonically increase with specific impulse. At the nominal mass flow rate of 10 mg/s and between discharge voltages of 300 and 1000 V, total specific impulse and total efficiency ranged from 1600 to 3400 s and 51 to 61%, respectively. Comparison with a similar thruster showed how efficiency can be optimized for specific impulse by varying the shape of the magnetic field. Plume divergence decreased from a maximum of 48 deg at 400 V to a minimum of 35 deg at 1000 V, but increased between 300 and 400 V as the likely result of a large increase in discharge current oscillations. The breathing-mode frequency continuously increased with voltage, from 14.5 kHz at 300 V to 22 kHz at 1000 V, in contrast to other Hall thrusters where a sharp decrease of the breathing-mode frequency was found to coincide with increasing electron current and decreasing efficiency. These findings suggest that efficient, high-specific impulse operation was enabled through the regulation of the electron current with the applied magnetic field.