In this article, we present a novel robotic system for skin photo-rejuvenation, which uniformly delivers laser thermal stimulation to a subject’s facial skin tissue. The robotized treatment is performed by a customized manipulator instrumented with a cosmetic laser generator, a depth sensor, and a thermal camera. To plan the optimal trajectory of the manipulator, our system computes the surface model of the face and segments it into seven regions, then automatically fills these regions with uniform laser irradiation. Finally, we report the detailed results of experiments on multiple human subjects to validate the performance of the system. To the best of the author’s knowledge, this is the first time that facial skin rejuvenation has been automated by robot manipulators.
In this article, we present a novel robotic system for heliography, which literally refers to painting with the Sun. In the context of artistic creation, heliography involves the precise manipulation of a magnifying glass to burn artwork on wooden panels by concentrating solar energy. Since this painting procedure exposes the human operator to prolonged periods of intensive sunlight, it can potentially cause sunburns to the skin or damage the eyes. To avoid these issues, in this article, we propose to automate the heliography process with a robot in lieu of a human operator. The proposed thermal servoing capabilities have the potential to robotize various solar power generation technologies such as concentrated solar power (CSP) and concentrated photovoltaics (CPVs). To perform this task, our robotic system is equipped with a magnifying glass attached to the end-effector and is instrumented with vision and thermal sensors. The proposed sensor-based controls enable to automatically: 1) track the orientation of the Sun in real time to maximize the concentrated solar energy; 2) direct the solar rays toward the point of interest; and 3) control the heat power intensity at the target point to achieve the required steady-state temperature. The performance of our system is evaluated by conducting autonomous heliography experiments with various patterns.
In this article, we introduce a new sensor-based control method that regulates (by means of robot motion) the temperature of objects that are subject to a radiative heat source. This valuable sensorimotor capability is needed in many industrial, dermatology, and field robot applications, and it is an essential component for creating machines with advanced thermomotor intelligence. To this end, we derive a geometric-thermal-motor model, which describes the relation between the robot’s active configuration and the produced dynamic thermal response. We then use the model to guide the design of two new thermal servoing controllers (one model-based and one adaptive), and analyze their stability with Lyapunov theory. To validate our method, we report a detailed experimental study with a robotic manipulator conducting autonomous thermal servoing tasks. We show that the temperature of multiple objects with unknown thermophysical properties attached to the same end-effector can be effectively regulated by controlled robot motion. Although thermal sensing is a mature technology in many industrial thermal engineering applications, its use as a feedback signal for robot control has not been sufficiently studied in the literature. To the best of our knowledge, this is the first time that temperature regulation is formulated as a motion control problem for robots.