We discuss coherent optical orthogonal frequency division multiplexing (CO-OFDM) as a suitable modulation technique for long-haul transmission systems. Several design and implementation aspects of a CO-OFDM system are reviewed, but we especially focus on phase noise compensation. As conventional CO-OFDM transmission systems are very sensitive to laser phase noise a novel method to compensate for phase noise is introduced. With the help of this phase noise compensation method we show continuously detectable OFDM transmission at 25.8 Gb/s data rate (20 Gb/s after coding) over 4160-km SSMF without dispersion compensation.
A novel soliton transmission scheme to suppress the accumulation of the Gordon-Haus jitter using periodic dispersion compensation and inline optical filters has been proposed. With 90% dispersion compensation rate and optimum optical filters, a Q2 of 19 dB and a large power window of 2 dB were confirmed for a 20 Gbit/s, 9000 km transmission system by using a 1000 km-long recirculating loop.
18 February 2009 in Journal of Lightwave Technology
We discuss optical multi-band orthogonal frequency division multiplexing (OFDM) and show that by using multiple parallel OFDM bands, the required bandwidth of the digital-to-analogue/ analogue-to-digital converters and the required cyclic prefix can significantly be reduced. With the help of four OFDM bands and polarization division multiplexing (PDM) we report continuously detectable transmission of 10 times121.9-Gb/s (112.6-Gb/s without OFDM overhead) at 50-GHz channel spacing over 1,000-km standard single mode fiber (SSMF) without any inline dispersion compensation. In this experiment 8 QAM subcarrier modulation is used which confines the spectrum of the 121.9 Gb/s PDM-OFDM signal within a 22.8 GHz optical bandwidth. Moreover, we propose a digital signal processing method to reduce the matching requirements for the wideband transmitter IQ mixer structures required for PDM-OFDM.
Focus Issue on Orthogonal-Frequency-Division Multiplexed Communications Systems and NetworksWe discuss the realization and performance of polarization-division-multiplexed orthogonal frequency division multiplexing (PDM-OFDM) for long-haul transmission systems. Polarization demultiplexing of the PDM signal at the receiver is realized by employing a multiple-input multiple-output (MIMO) detector. Using a recirculating loop a long-haul transmission experiment is reported of 52.5 Gbits/s PDM-OFDM (40 Gbits/s after coding) over 4160 km of standard single-mode fiber (SSMF). In this transmission experiment, 16 wavelength-division-multiplexed (WDM) channels are transmitted at 50 GHz channel spacing, and we show that MIMO processing in the receiver enables both polarization demultiplexing and a large PMD tolerance.
31 January 2018 in Journal of Lightwave Technology
IoT requires cloud infrastructures for data analysis (e.g., temperature monitoring, energy consumption measurement, etc.). Traditionally, cloud services have been implemented in large datacentres in the core network. Core cloud offers high-computational capacity with moderate response time, meeting the requirements of centralized services with low-delay demands. However, collecting information and bringing it into one core cloud infrastructure is not a long-term scalable solution, particularly as the volume of IoT devices and data is forecasted to explode. A scalable and efficient solution, both at the network and cloud level, is to distribute the IoT analytics between the core cloud and the edge of the network (e.g. first analytics on the edge cloud and the big data analytics on the core cloud). For an efficient distribution of IoT analytics and use of network resources, it requires to integrate the control of the transport networks (packet and optical) with the distributed edge and cloud resources in order to deploy dynamic and efficient IoT services. This paper presents and experimentally validates the first IoT-aware multi-layer (packet/optical) transport SDN and edge/cloud orchestration architecture that deploys an IoT-traffic control and congestion avoidance mechanism for dynamic distribution of IoT processing to the edge of the network (i.e., edge computing) based on the actual network resource state.
12 January 2018 in Journal of Lightwave Technology
Partial multiple-input multiple-output (MIMO) -based weakly-coupled mode-division multiplexing (MDM) transmission has been proposed to reduce the MIMO matrix size in MDM. This technique can mitigate the burden of MIMO processing for high-order few-mode fiber (FMF) transmission. In this paper, firstly, we show that modal XT can be sufficiently suppressed over the C+L band using a weakly-coupled FMF and a highly mode-selective multiplexer/de-multiplexer. Next, 10-mode-multiplexed 336-WDM transmission of dual-carrier 12-Gbaud dual-polarization (DP) - quadrature phase-shift keying (QPSK) signals over a 48-km weakly-coupled FMF using only 2x2 or 4x4 partial MIMOs is demonstrated. To the best of our knowledge, in this experiment, we achieve a record fiber capacity of 257 Tbps with an aggregate spectral efficiency of 30.5 bit/s/Hz in single-core fiber transmission.