Chemical Engineering Department, Universidad Michoacana de San Nicolás de Hidalgo, Francisco J. Múgica S/N, Ciudad Universitaria, Morelia, Michoacán 58060, México
Auto-generated profile, based on publicly available information
Luis Germán Hernández-Pérez
Chemical Engineering Department, Universidad Michoacana de San Nicolás de Hidalgo, Francisco J. Múgica S/N, Ciudad Universitaria, Morelia, Michoacán 58060, México
In this chapter, an overview of the major process simulators is provided. A basis of their structure is presented and described as well as their operating principles. Next, three packages are depicted, CHEMCAD, Aspen-HYSYS and Aspen Plus, with examples from flowsheeting of major processes, including methanol production or a power plant, to distillation columns and heat exchanger design. Finally, a section where optimization is carried out with modular process simulators is presented, with a small example. <!----> <!----> <!----> <!---->
Biogas has gained wide interest for heat and renewable-chemical production, but early facility design is often constrained by the cost and duration of biochemical methane potential (BMP) assays, detailed substrate analyses and plant-specific process models. BENTO-AD is a chemistry-constrained Python workflow that converts total solids (TS), volatile solids (VS), and carbon, hydrogen, oxygen, nitrogen and sulfur (CHONS) data into reproducible methane, energy, formal dry-biogas and residual-digestate indicators. The workflow retains the Buswell theoretical ceiling and applies a bounded descriptor correction when endpoint BMP evidence is unavailable. In an agricultural-feedstock case study containing 130 calibration-ready endpoint records, BENTO-AD reduced the endpoint-BMP root mean squared error by 72.5% relative to the theoretical ceiling; deterministic five-fold validation retained a similar reduction of approximately 72%. Decision maps distinguished individual cattle-slurry and energy-crop/silage records with favorable energy indicators from poultry-manure and cereal/agro-industrial residue records with comparatively high residual-nitrogen indicators, while also identifying balanced candidates. Mixture records denote composite feedstocks reported in the source database and are distinct from user-defined co-digestion scenarios; the record-specific results do not establish general differences between livestock-manure categories. BENTO-AD provides an auditable screening layer for prioritizing biomass residues and co-digestion hypotheses before longer BMP campaigns, detailed reactor simulation or site-specific design studies are justified.
The design of a gasification reactor could be considered as the platform for biomass biorefineries. Among the sources of biomass are urban lignocellulosic waste, the accumulation of which causes significant environmental problems. Common wastes for gasification include, for example, citrus fruit peels, sawdust, cane bagasse, etc. Each of these wastes contains different amounts of carbon, hydrogen, oxygen, nitrogen, sulfur and ash, as well as different amounts of moisture. These quantities influence the evaluation of the quality of the synthesis gas, defined by the ratio (H₂/CO), the H₂ production and the H₂S content. This work proposes the development of the stoichiometry necessary to model the reactor as a process unit, based on the empirical formulas of each lignocellulosic waste, its degree of polymerization and the use of the generalized stoichiometry technique.
16 November 2026 in Industrial & Engineering Chemistry Research