1 January 2024 in Scientifica
Due to population growth and climate changes, there is a rising need for alternative food and protein sources to reduce protein scarcity and the environmental impact of food industries. Single‐cell proteins (SCPs) have the potential to partially or fully substitute plant‐ and animal‐derived dietary proteins. Bacillus subtilis is an appealing bacterium for SCP production because of its fast growth and ability to obtain high protein and essential amino acid (AA) content in its biomass. It is also capable of utilizing a wide range of substrates. B. subtilis attractiveness and efficiency can be further enhanced using mutagenesis. In this study, a novel approach to creating mutant strains with enhanced protein and AA content was experimentally validated. The method is based on the application of AA inhibitors for selective pressure to ensure the growth of mutants with enhanced protein and/or AA synthesis capacity. For AA inhibitors, three herbicides were used: glufosinate–ammonium (GA), L‐methionine sulfoximine (MSO), and S‐(2‐aminoethyl)‐L‐cysteine (AEC). Initially, AA inhibitor doses for the complete inhibition of wild‐type (WT) B. subtilis strain were determined. Then, B. subtilis was treated with EMS chemical mutagen and created mutants were cultivated on a medium containing inhibitory dose of AA inhibitors. Growing samples were selected, analyzed, and compared. The optimal inhibitory concentrations of herbicides for mutant selection were 0.05–0.4 M for GA, 0.01–0.05 M for MSO, and 0.2 M for AEC. The best‐performing mutants were selected when using GA—improvement of 7.1 times higher biomass content, 1.5 times higher protein concentration, 1.2 times higher AA content, and 1.2 times higher essential AA index was achieved in comparison with WT B. subtilis. Enhanced mutants were also successfully selected when using MSO and AEC. This study demonstrates the potential of using AA inhibitors for the selection of mutants with improved protein and AA profiles.
31 December 2024 in Journal of Industrial Microbiology and Biotechnology
: According to the Food and Agricultural Organisation 2024 statement, developing single-cell protein technology is important to reduce the burden on conventional feed protein production sectors. In this regard, improved commercial strains rich in amino acids, especially Lys and Met, may provide a sustainable alternative source of protein in aquaculture diets. The developed and laboratory-validated methodology for creating protein-synthesizing mutants will strengthen the competitiveness of SCP production technology. The present work provides unique results on improving the protein-producing properties of wild-type Phaffia rhodozyma DSM 5626 by mutagenesis and screening on herbicide-containing medium as a selective agent for amino acid biosynthesis inhibition. Inhibitory concentrations of pure herbicide actives were determined for S-(2-aminoethyl)-L-cysteine (AEC) hydrochloride and glufosinate-ammonium (GA) for complete inhibition and strong inhibition of the DSM 5626 strain. GA at a concentration of 50 mM and 100 mM and AEC at 0.5 mM and 2.5 mM were chosen for mutant selection after chemical mutagenesis. The use of herbicides resulted in the selection of mutants with significantly improved synthesis of Met and Lys. Specifically, mutants GA6/4 and GA7/5 exhibited 37% and 26% higher Met levels, respectively, while GA6/3 had a 14% increase in Lys compared to the wild-type strain. The AEC3/9 mutant demonstrated a 35% increase in Met, 24% in Lys, 8% in Ile, and 6% in Phe, underscoring the efficacy of this screening approach in enhancing essential amino acid content. The protein quality parameters essential amino acid index and amino acid score of these mutants became higher compared with commercial strains of SCP yeast such as C. utilis, S. cerevisiae, K. marxianus, etc. One-Sentence Summary: Mutagenesis combined with selective screening using herbicides is an effective approach to enhancing amino acid biosynthesis in yeast.
11 January 2024 in Biology Methods and Protocols
Microorganisms are widely used for the industrial production of various valuable products, such as pharmaceuticals, food and beverages, biofuels, enzymes, amino acids, vaccines, etc. Research is constantly carried out to improve their properties, mainly to increase their productivity and efficiency and reduce the cost of the processes. The selection of microorganisms with improved qualities takes a lot of time and resources (both human and material); therefore, this process itself needs optimization. In the last two decades, microfluidics technology appeared in bioengineering, which allows for manipulating small particles (from tens of microns to nanometre scale) in the flow of liquid in microchannels. The technology is based on small-volume objects (microdroplets from nano to femtolitres), which are manipulated using a microchip. The chip is made of an optically transparent inert to liquid medium material and contains a series of channels of small size (<1 mm) of certain geometry. Based on the physical and chemical properties of microparticles (like size, weight, optical density, dielectric constant, etc.), they are separated using microsensors. The idea of accelerated selection of microorganisms is the application of microfluidic technologies to separate mutants with improved qualities after mutagenesis. This article discusses the possible application and practical implementation of microfluidic separation of mutants, including yeasts like Yarrowia lipolytica and Phaffia rhodozyma after chemical mutagenesis will be discussed.
1 January 2026 in Environmental and Climate Technologies
Low‑quality biomass (LQB) is an abundant feedstock for small‑scale heat generation, but its variable composition often leads to unstable combustion and elevated emissions in domestic boilers. This study assesses the combustion behaviour of 18 pelletized LQB feedstocks using a 25-kW boiler operated under controlled conditions. The fuels exhibited wide performance differences, reflected in broad emission ranges and noticeable variation in thermal efficiency. To support predictive evaluation, statistical models were established that link key fuel characteristics with CO, NO x , PM and efficiency, enabling quantitative estimation of combustion performance across heterogeneous feedstocks. To clarify ash‑related effects, ten representative ashes were characterized using ICP-OES and XRD. Their chemical and phase compositions were assigned to the main Vassilev classes, which corresponded to distinct ash‑forming mineral groups. Ca‑rich ashes were dominated by carbonate and phosphate phases suitable for neutralization or construction applications. K‑rich ashes contained soluble sulphate and chloride species relevant for nutrient‑recovery routes, while Si‑rich ashes consisted mainly of quartz or amorphous matrices with low reactivity. The combined combustion and ash elemental and phase analysis results demonstrate clear links between LQB composition, emission behaviour and ash transformation mechanisms, providing a practical basis for evaluating the suitability of alternative biomass pellets for small‑scale heat production.
1 January 2026 in Environmental and Climate Technologies
The yeast Phaffia rhodozyma is widely used as a natural source of astaxanthin for aquaculture, but its protein-rich biomass has been less studied as single-cell protein (SCP). This study explored the potential of P. rhodozyma as a dual-purpose production system by optimizing a low-cost medium for a protein-enriched mutant (AEC3/9), while also monitoring astaxanthin formation. A central composite design and response surface methodology (RSM) were used to evaluate the effects of glycerol, urea, ammonium sulphate, and initial pH. Shakeflask cultivations performed in triplicate (250 mL baffled flasks, 20 mL working volume, 22 °C, 250 rpm, 7 days) showed that protein productivity reached its maximum on day 4, which was selected as the reference point for optimization. Astaxanthin was included in the model but was not used as the main optimization target. The optimization results suggested that moderate glycerol concentrations (70–90 g/L), low urea (<0.2 g/L), and slightly acidic pH (5.9) were the most suitable conditions. Under the selected conditions (70.54 g/L glycerol, 0.134 g/L urea, 4.98 g/L (NH₄)₂SO₄, pH 5.86), biomass reached 26.11 g/L with a protein content of 29.79 % (7.78 g/L). Scale-up in a 5 L stirred-tank bioreactor confirmed the feasibility of the process, reaching 33.50 g/L biomass and 6.82 g/L protein at 88 h. The results indicate that protein accumulation occurs before the phase associated with increased astaxanthin production. Optimizing nitrogen source and pH allows stable production of P. rhodozyma biomass on glycerol, supporting its use as an SCP co-product alongside astaxanthin.
10 May 2023 in Conect. International Scientific Conference of Environmental and Climate Technologies
This article reviews state-of-the-art microdroplet technological solutions for screening microorganisms mutant and GMO strains. Microorganisms used in the production of various products – single-cell protein, single-cell oil, enzymes, pigments and other bioactive compounds – can always be improved and their properties enhanced to increase the production of products of interest, to simplify microbial cultivation process, improve efficiency or adapted strains to use cheaper raw materials such as agroindustrial by-products. Microorganisms can be improved using either classical mutagenesis techniques or genetic engineering methods. Regardless of the selected method for mutant or GMO creation, during the process most promising microorganism strains must be selected, which is usually a slow and labour-intensive process. The use of microdroplets is a promising technological solution to speed up strain selection. This review looks at the latest developments in microdroplet technology, compares their variations, and identifies future prospects.