Wide energy gap inorganic halide perovskites have become emerging candidates for potential applications in modern optoelectronics devices. However, to date, these semiconducting compounds have not been explored theoretically to a significant extent. Herein, we performed ab initio computations to explain the structural, electronic and optical behaviour of inorganic CsPbCl3 and Mn-doped CsPbCl3 nanocrystals (NCs). We also synthesized these NCs and further validated our experimental results with density functional theory (DFT) calculations. The results provide insight into the effect of Mn doping on the important properties of CsPbCl3 NCs such as their lattice parameter, electronic band structure, density of states, dielectric constant, absorption coefficient and refractive index. After geometry optimization using the Limited-memory Broyden–Fletcher–Goldfarb–Shanno (LBFGS) algorithm, a reduction in the lattice parameter from 5.605 Å to 5.574 Å was observed after doping Mn in the CsPbCl3 NCs, which is in good agreement with the calculated results from the X-ray diffraction (XRD) pattern (5.610 Å to 5.580 Å) and high-resolution transmission electron microscopy (HRTEM) images (5.603 Å to 5.575 Å). The incorporation of Mn in CsPbCl3 was observed in the electronic band structure in the form of additional states present in the energy gap and an increment in the band gap of the CsPbCl3 NCs. This result is consistent with the photoluminescence (PL) plot, which showed dual color emission in the case of the Mn-doped CsPbCl3, which is attributed to the Mn2+ d-band to d-band transition. The partial density of states (PDOS) of the Mn-doped CsPbCl3 NCs clearly indicates the contribution of the Mn 3d orbitals to the upper valence band and conduction band together with the contribution of the Pb 6p and Cl 3p orbitals. Moreover, a blue-shift phenomenon was observed from the dielectric constant and absorption coefficient spectra, which is due to the incorporation of Mn in CsPbCl3. Also, a significant peak was observed in the absorption coefficient and dielectric constant spectra around 2.08 eV, which is in good agreement with the PL plot. This DFT study with experimental observation provides a way to investigate this type of compound and to tailor its interesting characteristics through doping.
A high-performance InGaAs/GaAs vertical quantum dot infrared photodetector (QDIP) with combined barrier of quaternary In0.21Al0.21Ga0.58As and GaAs was investigated in this study. A dominant long wavelength (∼10.2 μm) response was observed from the device. The device demonstrates large responsivity (2.16 A/W) with narrow spectral-width (Δλ/λ ∼0.14) and high detectivity (1.01 × 1011 cm Hz1/2/W at 0.3 V) at 10.2 μm at 77 K. In addition, the device has also produced a detectivity in the order of 6.4 × 1010 cm Hz1/2/W at 100 K at a bias of 0.2 V, indicating its suitability for high-temperature operations.
We present a model for the effect of thermal annealing on a single-layer InAs/GaAs quantum dot (QD) heterostructure and study the corresponding variation in full photoluminescence (PL) spectrum. In/Ga interdiffusion due to annealing is modeled by Fickian diffusion and the Schrödinger equation is solved separately for electrons and holes to obtain ground state PL peaks of the heterostructure at different annealing temperatures. We theoretically examine the decrease in strain effects and carrier confinement potentials with annealing. PL spectra of the entire ensemble of QDs, annealed at different temperatures, are calculated from a lognormal distribution of QD heights derived from experimental atomic force microscopy (AFM) data. Results from our calculations, which illustrate the blueshift in emission wavelength and linewidth variation in PL with annealing, are in excellent agreement with experimental PL observations on the same samples. This highlights the potential of the model to assist in precisely engineering the optical properties of QD materials for specific device applications. Moreover, the simplicity of the model and its multiple useful features including computation of material interdiffusion, band profiles and full PL spectra make it a valuable tool to study annealing effects on QD heterostructures.
The lead-free metal halide perovskite materials are a potential candidate for optoelectronics and photovoltaic applications due to their promising and outstanding properties. Herein, we have tuned and improved the structural, electronic, and optical behaviour of the CsSnCl3 perovskite nanomaterial by incorporating reduced graphene oxide (rGO) for solar cell applications. The hot injection method has been used for the synthesis of CsSnCl3 and nanocomposites of CsSnCl3/rGO with varying rGO content (1%, 2%, 3%, 4% and 5%) and further material characterization has been done by using various characterization techniques for improvement of the quality and performance of perovskite solar cells (PSCs). The lead-free halide-based inorganic CsSnX3 (X = Cl, Br, I) perovskite layer and rGO/CsSnCl3 nanocomposite are synthesized by using a cost-effective hot injection method. The crystal structure of the as-prepared CsSnCl3 and rGO nanocomposites has been analyzed by X-ray diffraction (XRD). Ultraviolet-visible spectroscopy (UV-Vis) confirms that both the CsSnCl3 and rGO nanocomposite have a direct bandgap of ∼3.24 eV and 3.19 eV, respectively. The photoluminescence (PL) confirmed that the rGO nanocomposite shows a high quenching phenomenon as compared to the pristine CsSnCl3 material, and such quenching is possibly due to the faster separation and transfer of charges of photogenerated electron–hole pairs. In PL, a blue shift of 7 nm is observed by incorporating the rGO sheet with CsSnCl3 nanoparticles. Along with this, we have examined the surface morphology of the rGO, CsSnCl3, and rGO/CsSnCl3 nanocomposite materials by field emission gun scanning electron microscopy (FEG-SEM), and it is observed that CsSnCl3 nanoparticles are a granular kind of structure and spread over the rGO sheet. A morphological study has been done for the CsSnCl3 and rGO nanocomposites by using a high-resolution transmission electron microscope (HRTEM), and a study of the selected area electron diffraction (SAED) pattern confirms that high crystallinity has been observed in pure CsSnCl3 compared to the rGO nanocomposites. In the present study, the incorporation of rGO in the lead-free halide-based perovskite absorber layer demonstrates highly promising properties to develop several photovoltaics and optical devices in the near future.