Surface Plasmon resonance (SPR) provides an efficacious and label-free detection method for optical fiber bio-sensing. MoSe2 is one of the transition metal dichalcogenides (TMDCs) which has broad applications in detecting specific reactions. Cysteamine hydrochloride with enriched groups can generate self-assemble films for tight attachment. In this study we aimed to combine the rapid response of optical fiber SPR sensors with the enhanced sensitivity of MoSe2 nano-films. An optical fiber SPR biosensor with MoSe2-Au nanostructure was proposed and implemented, and a sensitivity of 2821.81 nm/RIU was achieved, which was approximately 98.7% higher than that of conventional SPR sensor without using MoSe2 nanostructure. Furthermore, Bovine Serum Albumin (BSA) was utilized as the target molecule to test the bioaffinity of the biosensor with MoSe2 deposition cycles from 0 to 8. Weighing the sensitivity and the figure of merit (FOM), the best deposition cycle of MoSe2 was 4 with the sensitivity of 2793.36 nm/RIU and FOM of 37.24 RIU-1. At last, immunization experiments were carried out using Goatanti-Rabbit IgG and a detection limit of 0.33 µg/mL was achieved. The rapid response and the high bioaffinity showed a strong applicability of the proposed MoSe2-Au SPR immune-sensor in specific interactions and immunization therapy.
In this paper, we proposed an all-fiber waveguide coupled surface Plasmon resonance (SPR) sensor which was designed and fabricated with Au-ZnO-Au sandwich multi-layer structure. Based on the transfer matrix method (TMM), the theoretical modeling of the proposed sensor structure was investigated. The influence of the layer thickness on the transmission spectrum of the sensor was studied numerically, in order to optimize each layer thickness, leading to sensitivity enhancement in the infrared spectral range. Meanwhile, an experimental testbed for the refractive index measurement was implemented based on the proposed all-fiber waveguide coupled SPR sensor. Using this waveguide coupled SPR sensor, the refractive index sensing was realized with a sensitivity enhancement of 7%—131% compared with conventional SPR sensors.
An improved Drude-Lorentz model was proposed to describe the effect of annealing on the surface Plasmon resonance (SPR) sensor. In the new model, the grain structure is taken into account to describe theoretically the dispersion of gold films. Then the improved model is used to analyze the performance of SPR sensors before and after annealing. The results indicate that the grain structure of the gold film affect the resonance properties significantly. In our research, a considerable improvement in SPR fiber sensor performance is observed after annealing. The grain size of the gold film rises from 10.8 nm to 34.3 nm, and the absorption spectrum of the SPR fiber sensor becomes deeper and sharper, with the figure of merit increasing from 18.5 to 22.8 after annealing. Comparing with other sensor performance enhancement methods, the annealing progress does not change the sensor structure or add new modified layer. Therefore, most SPR sensors can be further annealed to improve the quality of the sensor after fabrication. This property makes the application of annealing very promising in optical sensing region.
The performance of an optic fiber SPR sensor is affected by the optical property of the metal layer. The optical property of the metal layer is affected by the surface morphology and the grain structure of itself. In this paper, the optical property of metal film based on the Drude-Lorentz model is improved by employing the Fuchs-Sondheimer theory and the Mayadas-Shatzkes theory. In the new law, the surface roughness and the grain structure are taken into account to describe the permittivity of metal layer theoretically. Then the improved model is used to analyze the performance of the optical fiber SPR sensor. The results shows that the surface roughness and the grain structure of metal layer significantly affect the resonance properties of the sensor. Specifically, the surface roughness of metal film can change the resonance wavelength of the SPR sensor. When the surface becomes smooth, resonance wavelength of SPR will decrease. In addition, with the increasing of grain size, the depth of the SPR curve increases obviously, while the full width at half maximum of the sensor decreases a lot. It means that, for a certain metal layer, the effects of the surface roughness and the grain structure should be considered in SPR technique.