21 June 2020 in Agricultural science Euro-North-East
Increasing the efficiency of direct strip sowing of grass seeds by means of seeders with active furrow openers is possible when seed and fertilizer working bodies are removed from the zone of operation of disk milling cutters. A structural andtechnological scheme of the coulter group of the sod seeder for strip sowing is proposed, which consists of a milling furrowopener, fertilizer and seed coulters mounted on leashes in the form of torsion spring trailers, and a rolling roller. To ensurehigh quality multilevel sowing of grass seeds and granules of mineral fertilizers, it is necessary at the design stage to determine the length of the fertilizer coulter sides, which prevent premature shedding of soil from the furrow walls until the mineral fertilizer granules reach the bottom of the furrow, and the minimum allowable distance between the fertilizer and seedcoulters, which allows to cover the granules of mineral fertilizers with soil completely while maintaining the compact designof the coulter group. In the course of theoretical research, mathematical dependences were obtained to determine the rationalparameters and operating modes of the coulter group of the proposed design, which will ensure a minimum spread of mineralfertilizer granules over the depth of incorporation and a high stability of the soil layer thickness between mineral fertilizergranules and grass seeds. Rational parameters of the coulter group of the proposed design are determined for the range ofoperating speeds of the sod seeder for strip sowing: angle at the apex of the shank fertilizer coulter in the horizontal planeis 15-20º, the length of the fertilizer coulter sides is 0.040-0.045 m, the width of the fertilizer coulter bell is 0.02 m, minimumpermissible distance between the fertilizer and seed coulters is 0.14-0.16 м.
25 April 2024 in Agricultural science Euro-North-East
For the effective use of sod seeders SDK in conditions of degraded forage lands, it is necessary to modernize the design of their coulter group to work in conditions of high soil moisture and increased content of plant residues in it. A method of strip sowing is proposed, which is based on the removal of the sowing working elements from under the casing of a milling furrow opener, and a design and technological scheme of the coulter group with a shoe opener mounted on a suspension mechanism in the form of torsion springs. The coulter group includes a mounting bracket on a seeder, a suspension mechanism, shoe openers, rollers, mechanisms for adjusting the position of coulters in the vertical and horizontal planes and the forces of deepening coulters and the pressure of rollers on the soil. Compared to the coulter group of SDK seeders, its weight (19.6 kg) is reduced by 3.8 kg while the total length of the seeder increases by 0.12 m. To assess the efficiency of the modernized coulter group of the sod seeder, experimental studies were carried out in the field, during which the quality indicators of seed placement were determined when using a serial coulter group of SDK seeders and a prototype coulter group. Comparative studies of coulter groups of a sod seeder showed that when sowing Eastern galega, the depth of seed placement complies with agrotechnical requirements and is: for the coulter group of SDK seeder – 19.4...22.4 mm, for the prototype - 18.6...19.5 mm, and for the prototype the value of the standard deviation is almost two times lower. The uniformity of the distribution of seeds over the width of the strip for the coulter group of the SDK seeder is 20.2...26.1 mm, for the prototype – 8.4...10.1 mm.
20 April 2022 in Agricultural science Euro-North-East
The development of ecological agriculture has aroused interest to the technology of increasing the productivity of natural forage lands, which consists in strip sowing of grasses with mechanical tillage in the sod of strips, the size of which ensures the successful development of seedlings without the use of chemicals. Several models of seeders SDK have been developed and mass-produced to implement this technology. A further development of this type of machines is the creation of a mounted seeder SDK-2.8M, intended for direct strip sowing of grass seeds into sod with the application of a starting dose of mineral fertilizers. To evaluate the efficiency of the seeder SDK-2.8M in the autumn of 2022, stand and field tests were carried out in the fields of the North-East Federal Research Center. Stand tests on sowing seeds of meadow fescue and red clover showed that the range of gear ratios of the seeder from 0.104 to 0.900 allows to set the seeding rate in the interval of 2.5-140.4 kg/ha. The sowing part ensures uniform distribution of seeds over the feed rolls and the stability of sowing by each feed roll in accordance with agrotechnical requirements. The deviation of the actual seeding rate from preassigned (6.0 kg/ha) for sowing fescue is 2.6%, clover – 2.3%; uneven seeding between feed rolls for fescue – 3.61%, for clover – 5.36%; seeding instability for fescue – 4.83%, for clover – 6.03%. Field tests revealed that the seeder stably performs tillage and clover sowing, maintains the working width and the installation depth of tillage. The average tillage depth was equal to 68 mm, the crumbling of the soil (fraction up to 25 mm) – 85.1%, the average depth of seeding – 16.4 mm, density after rolling – 1.1 g/cm3 .The use of a frame of the original design made it possible to reduce the number of assembly units of the tillage part and auxiliary mechanisms, which reduced the mass of the seeder by 640 kg, in comparison with SDKP-2.8M, while maintaining agrotechnical performance indicators.
28 April 2019 in Agricultural science Euro-North-East
The analysis of equipment for basic boardless plowing and surface tillage revealed the absence in the market of agricultural machinery of multifunctional units capable of reliable and efficient performing both types of tillage by means of one machine. The constructive-technological scheme is offered and the basic model of the unit with replaceable working bodies is developed: flat hoes for performance of the basic processing of soil at 14-25 сm with the creation of a mulch layer and cultivator hoes for carrying out the surface and shallow tillage at 5-14 cm. To assess the effectiveness of the basic model of the unit in 2018 in field conditions a research was carried out, during which the main agrotechnical indicators of the quality of soil treatment were determined. Studies have shown that the degree of crumbling of the soil at the basic boardless plowing of sod-podzolic medium loamy soil at a speed of more than 6.5 km/h exceeded 80 %. For shallow tillage to a depth of 12 cm in the range of operating speeds above 7.0 km/h the amount of a soil fraction up to 25 mm was not less than 70 %. The unit stably sustains the working coverage width and the installation depth of tillage. The variant of the unit with a set of working bodies for the basic boardless plowing in the entire range of operating speeds provides an average tillage depth of 19.5-21.0 cm at an installation depth of 20 cm, with working bodies for shallow tillage - of 11.5-12.0 cm at an installation depth of 12 cm. The height of roughness of the field surface after the basic boardless plowing was 20.7-23.0 mm, for shallow tillage – 12.5-17.0 mm. The results of the research showed that the basic model of the multifunctional unit can perform the basic boardless plowing and shallow tillage in compliance with the basic agrotechnical requirements without the use of replaceable adapters for additional tillage of the top layer of soil. The use of additional working bodies will make it possible to form more highly specialized versions of the machine based on the basic model of the unit.
25 April 2025 in Agricultural science Euro-North-East
Federal Agricultural Research Center of the North-East has developed a basic model of a tillage unit with replaceable working bodies in the form of flat-cutting hoes or duckfoot shovels, the combination of which with disk sections allows in compliance with basic agrotechnical requirements to perform primary non-moldboard tillage of 14–25 cm and a complex of operations of pre-sowing soil cultivation operations of 5–14 cm. Further development of the unit design is aimed at improving the quality of processing the surface layer of soil by equipping the basic model with replaceable adapters for additional soil processing. Initially, a set of replaceable adapters was manufactured for the research, including the following types of rollers: tubular, spiral-tubular, rod and bar-tooth. The purpose of the research was to evaluate the effectiveness of using a unit with replaceable adapters for processing the surface layer of soil during basic non-moldboard and shallow tillage. The research was conducted in the form of field tests, during which the main indicators of the quality of soil cultivation were determined: fractional composition of the soil, density, stability of the depth of cultivation and surface ridge. It was revealed that when the unit performed the basic non-moldboard tillage of light loamy soil, the degree of its crumbling, depending on the type of adapter, was 82.7...95.3 %, when performing shallow tillage, the content of the soil fraction less than 25 mm was 82.5...89.7 %, which fully met the agrotechnical requirements. The parameters of processing depth during basic non-moldboard and shallow tillage indicated a sufficiently high stability of the depth of the working body travel. Agrotechnical assessment during primary soil cultivation showed that the surface ridge during autumn cultivation of clean fallow was 30...36 mm, and during cultivation of grain stubble – 46 mm. In the variants of the unit equipped with working bodies for shallow tillage, this indicator varied within the range of 20...28 mm. The soil density after basic non-moldboard tillage was 1.22...1.31 g/cm3, after shallow tillage – 1.16...1.24 g/cm3. The obtained data indicate that the operation of the unit in all configuration options meets the agrotechnical requirements for pre-sowing and autumn tillage.