13 March 2023 in IEEE Transactions on Nuclear Science
The radiation environment in the inner radiation belt is severe due to the large flux of high energy protons. Very few satellites are deployed in inner radiation belt today, and radiation shielding in this region did not get much attention. An imaging satellite developed by the Chinese Academy of Sciences will operate in the inner radiation belt in 2023. In order to shield the high energy protons, a new composite material was developed, and the shielding ability of this material was compared with that of Al, Ta, and sandwich materials by the Geant4 simulation tool. The results show that the new material can reduce the total ionizing dose by 40%, and the displacement damage dose by 50% compared with the Al shielding in same shielding mass. The number of transmitted protons under the shielding of Al and new materials was tested by using a 30 MeV~60 MeV proton beam on the ground, and the experimental results agree well with the simulation results.
22 February 2024 in TechRxiv
Electronic parts in space inevitably subject to radiation effects leading to the degradation of electronic performance or even failure, so radiation performance of an electronic part must be assessed to ensure it work normally in space. At present, to assess the ion radiation effects on a semiconductor device is directly through irradiation tests. However, due to the scarcity of cyclotron resources, the test time is difficult to appoint and the cost is huge. Due to schedule and budget constraints, it is also impossible to conduct irradiation tests on all semiconductor devices in actual space missions. Therefore, assessment of the radiation effects on semiconductor devices through irradiation tests has caused difficulties. Radiation susceptibility of semiconductor device is determined by the design topology and fabrication technology, and the irradiation test data shows that similar semiconductor devices has similar radiation susceptibility, so a method to assess the radiation effects on semiconductor devices base on similarity theory is proposed at first time in this paper. This assessing method does not require irradiation testing and does not require separate sampling. It has the virtues of easy implementation, quick response and low cost, providing an efficient method of assessing radiation effects on semiconductor devices.