Radwa A. Roshdy

Radwa A. Roshdy

Auto-generated profile, based on publicly available information

Radwa A. Roshdy

Department of Electrical Engineering, Higher Technological Institute, 10th of Ramadan City, Egypt

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2023 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
RRRadwa A. Roshdy
Radwa A. Roshdy
MSMohammed A. Salem
Mohammed A. Salem
Reconfigurable intelligent surface (RIS) is considered a promising technology for dense Internet of Things (IoT) networks to enhance spectral efficiency and coverage due to its lower energy consumption and decreased hardware cost. However, channel estimation is a significant challenge for two reasons; first, RIS reflects signals without any signal processing capabilities, and second, it contains large numbers of reflected elements, making the pilot overhead extremely high. In this paper, we propose a two-phased RIS channel estimation framework for MIMO uplink transmissions with lower pilot overhead. In phase I, we take advantage of the fact that RIS elements reflect all IoT devices through the same BS-RIS channel and propose a dual-link time division duplex (TDD) pilot transmission scheme for estimating the BS-RIS channel where the pilots are transmitted from BS to RIS and then reflected back to BS. Afterward, we propose an algorithm to obtain the BS-RIS channel from the dual link BS-RIS-BS cascaded channel. In phase II, we estimate the user channels between RIS and devices based on the knowledge of the BS-RIS channel obtained in phase I. Simulation results indicate that the proposed framework attained a lower normalized mean square error (NMSE) and higher sum rate than other channel estimation frameworks with lower pilot overhead and complexity overhead.

1 August 2025 in IEEE Open Journal of the Communications Society
Verified
Journal Article
Open access
MSMohammed A. Salem
Mohammed A. Salem
HKHossam M. Kasem
Hossam M. Kasem
RARoayat I. Abdelfatah
Roayat I. Abdelfatah
MEMohamed Youssef El-Ganiny
Mohamed Youssef El-Ganiny
RRRadwa A. Roshdy
Radwa A. Roshdy
Kirchhofffs Law Johnson Noise (KLJN)-based thermal noise modulation (Ther-Mod) represents a viable answer for secure Internet of Things (IoT) communication at ultra-low power levels. However, the conventional symmetric KLJN systems are not reliable, unless a large number of noise samples are employed, giving rise to a high latency and a low effective bitrate. We propose P-Ther-Mod, a new asymmetric KLJN-based modulation scheme, which utilizes a four-resistor structure in order to improve the bit error rate (BER) without imposing additional noise samples per bit. Theoretical bit error probability (BEP) expressions are developed for both wired and wireless IoT channels where the additive white Gaussian noise (AWGN) and Rayleigh fading models are considered. Simulation results demonstrate that the proposed P-Ther-Mod technique reduces the noise samples by up to 35 % (e.g., reaching BER =10-5 at N = 35 compared to BER = 10-5 at N = 50 in existing methods), and achieves BER. 10-8 at N = 200, improving previous approaches by 5 orders of magnitude. The asymmetric approach allows balancing higher bit rates by decreasing oversampling of noise. Furthermore, optimizing the detection threshold parameter (delta representing signal-to-noise ratio (SNR) in detection) enhances robustness and enables 7 dB savings in the SNR even under the fading channel. These developments render P-Ther-Mod a reliable, secure and scalable approach for IoT deployments with a vulnerable environment to interference, such as industrial sensor networks and wearable devices.

6 June 2019 in IEEE Access
Verified
Journal Article
Open access
MAMohamed A. Aboul-Dahab
Mohamed A. Aboul-Dahab
MFMohamed M. Fouad
Mohamed M. Fouad
RRRadwa A. Roshdy
Radwa A. Roshdy
Filter bank multicarrier (FBMC) is a strong candidate as a waveform based technique in advanced wireless communication systems (e.g. 5G), as an alternative to orthogonal frequency division multiplexing (OFDM). Like all multicarrier modulation techniques, FBMC suffers from high levels of peak-to-average power ratio (PAPR). Discrete Fourier transform (DFT) spreading can be used in FBMC for PAPR reduction with a quite notable increase in computational complexity and without any need for side information (SI) overhead at the receiver. However, the achieved PAPR reduction is of a marginal amount, compared to the single carrier effect in the single carrier frequency division multiple access (SC-FDMA). This is due to the in-phase and quadrature phase (IQ) overlapping structure between offset quadrature amplitude modulation (OQAM) FBMC symbols. In this paper, we propose the use of generalized DFT (GDFT) spreading as an alternative to DFT spreading for PAPR reduction in systems employing FBMC. We derive the conditions at which the GDFT can totally make use of the single carrier effect of DFT spreading and hence reducing the PAPR. We also propose an enhancement algorithm that is utilized in the GDFT for further PAPR reduction without any additional complexity overhead. From the simulation results that are run at different values of subcarriers, it is shown that the GDFT spreading with the enhancement algorithm (enhanced GDFT), attain extra amount of PAPR reduction over the other DFT spreading techniques. In addition, the GDFT spreading technique and the enhanced one also show better power spectral density (PSD) over the other DFT spreading techniques.

1 March 2018
Verified
Conference Paper
Closed access
MAMohammed A. AboulDahab
Mohammed A. AboulDahab
MFMohammed M. Fouad
Mohammed M. Fouad
RRRadwa A. Roshdy
Radwa A. Roshdy
Filter bank multicarrier (FBMC) is a strong waveform candidate for 5G instead of OFDM. However, FBMC is more sensitive to intrinsic interference which is resulting due to the orthogonality of the subcarrier functions in the real field only. This prevents the current channel estimation (CE) methods of OFDM from being applied to FBMC. A novel interference approximation method (IAM) is proposed in this paper relying on approximating the intrinsic interference from the neighboring pilots to improve CE performance besides simplifying its processing. The proposed IAM method uses pseudo pilots with magnitude larger than other conventional IAM methods. The proposed IAM method is compared with other conventional methods via different types of outdoors and indoors multipath fading channels including IEEE 802.22, IEEE 802.11, Rayleigh and AWGN. Simulation results demonstrate that the proposed IAM method achieves a lower bit error rate (BER) and peak-to-average power ratio (PAPR) under the aforementioned channel models.

27 February 2023 in Opto-Electronics Review
Verified
Journal Article
Closed access
RRRadwa A. Roshdy
Radwa A. Roshdy
AHAziza I. Hussein
Aziza I. Hussein
MMMohamed Mourad
Mohamed Mourad
MSMohammed A. Salem
Mohammed A. Salem
Visible light communication based on a filter bank multicarrier holds enormous promise for optical wireless communication systems, due to its high-speed and unlicensed spectrum. Moreover, visible light communication techniques greatly impact communication links for small satellites like cube satellites, and pico/nano satellites, in addition to inter-satellite communications between different satellite types in different orbits. However, the transmitted visible signal via the filter bank multicarrier has a high amount of peak-to-average power ratio, which results in severe distortion for a light emitting diode output. In this work, a scheme for enhancing the peak-to-average power ratio reduction amount is proposed. First, an algorithm based on generating two candidates signals with different peak-to-average power ratio is suggested. The signal with the lowest ratio is selected and transmitted. Second, an alternate direct current-biased approach, which is referred to as the addition reversed method, is put forth to transform transmitted signal bipolar values into actual unipolar ones. The performance is assessed through a cumulative distribution function of peak-to-average power ratio, bit error rate, power spectral density, and computational complexity. The simulation results show that, compared to other schemes in literature, the proposed scheme attains a great peak-to-average power ratio reduction and improves the bit the error rate performance with minimum complexity overhead. The proposed approach achieved about 5 dB reduction amount compared to companding technique, 5.5 dB compared to discrete cosine transform precoding, and 8 dB compared to conventional direct current bias of an optical filter bank multicarrier. Thus, the proposed scheme reduces the complexity overhead by 15.7% and 55.55% over discrete cosine transform and companding techniques, respectively.

25 July 2024 in Computers and Electrical Engineering
Verified
Journal Article
Closed access
MSMohammed A. Salem
Mohammed A. Salem
AHAnar A. Hady
Anar A. Hady
HHHanan H. Hussein
Hanan H. Hussein
RRRadwa A. Roshdy
Radwa A. Roshdy