Cynthia J. Hines

Cynthia J. Hines

Auto-generated profile, based on publicly available information

Cynthia J. Hines

National Institute for Occupational Safety and Health, Cincinnati, Ohio 45226, USA

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in Annals of Work Exposures and Health
Verified
Journal Article
Closed access
PDF file
CHCynthia J. Hines
Cynthia J. Hines
MJMatthew V. Jackson
Matthew V. Jackson
JDJames A. Deddens
James A. Deddens
JCJohn C. Clark
John C. Clark
XYXiaoyun Ye
Xiaoyun Ye
ACAntonia M. Calafat
Antonia M. Calafat
Bisphenol A (BPA) toxicity and exposure risk to humans has been the subject of considerable scientific debate; however, published occupational exposure data for BPA are limited. In 2013–2014, 77 workers at six US companies making BPA, BPA-based resins, or BPA-filled wax provided seven urine samples over two consecutive work days (151 worker-days, 525 samples). Participant information included industry, job, tasks, personal protective equipment used, hygiene behaviors, and canned food/beverage consumption. Total (free plus conjugated) BPA, quantified in urine by mass spectrometry, was detected in all samples. The geometric mean (GM) creatinine-adjusted total BPA (total BPACR) concentration was 88.0 µg g−1 (range 0.78–18900 µg g−1), ~70 times higher than in US adults in 2013–2014 (1.27 µg g−1). GM total BPACR increased during Day 1 (26.6–127 µg g−1), decreased by pre-shift Day 2 (84.4 µg g−1) then increased during Day 2 to 178 µg g−1. By industry, baseline and post-baseline total BPACR was highest in BPA-filled wax manufacturing/reclaim (GM = 111 µg g−1) and lowest in phenolic resin manufacturing (GM = 6.56 µg g−1). By job, total BPACR was highest at baseline in maintenance workers (GM = 157 µg g−1) and post-baseline in those working with molten BPA-filled wax (GM = 441 µg g−1). Workers in the job of flaking a BPA-based resin had the lowest concentrations at baseline (GM = 4.81 µg g−1) and post-baseline (GM = 23.2 µg g−1). In multiple regression models, at baseline, industry significantly predicted increased total BPACR (P = 0.0248); post-baseline, handling BPA containers (P = 0.0035), taking ≥3 process/bulk samples with BPA (P = 0.0002) and wearing a Tyvek® coverall (P = 0.0042) significantly predicted increased total BPACR (after adjusting for total BPACR at baseline, time point, and body mass index). Several work-related factors, including industry, job, and certain tasks performed, were associated with increased urinary total BPACR concentrations in this group of manufacturing workers. The potential for BPA-related health effects among these workers is unknown.

23 October 2008 in Annals of Occupational Hygiene
Verified
Journal Article
Closed access
PDF file
CHCynthia J. Hines
Cynthia J. Hines
NHNancy B. Hopf
Nancy B. Hopf
JDJames A. Deddens
James A. Deddens
ACAntonia M. Calafat
Antonia M. Calafat
MSManori J. Silva
Manori J. Silva
DSDeborah L. Sammons
Deborah L. Sammons
Phthalates are used as plasticizers and solvents in industrial, medical and consumer products; however, occupational exposure information is limited. We sought to obtain preliminary information on occupational exposures to diethyl phthalate (DEP), di-n-butyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP) by analyzing for their metabolites in urine samples collected from workers in a cross-section of industries. We also obtained data on metabolites of dimethyl phthalate (DMP), benzylbutyl phthalate (BzBP), di-isobutyl phthalate and di-isononyl phthalate. We recruited 156 workers in 2003–2005 from eight industry sectors. We assessed occupational contribution by comparing end-shift metabolite concentrations to the US general population. Evidence of occupational exposure to DEHP was strongest in polyvinyl chloride (PVC) film manufacturing, PVC compounding and rubber boot manufacturing where geometric mean (GM) end-shift concentrations of DEHP metabolites exceeded general population levels by 8-, 6- and 3-fold, respectively. Occupational exposure to DBP was most evident in rubber gasket, phthalate (raw material) and rubber hose manufacturing, with DBP metabolite concentrations exceeding general population levels by 26-, 25- and 10-fold, respectively, whereas DBP exposure in nail-only salons (manicurists) was only 2-fold higher than in the general population. Concentrations of DEP and DMP metabolites in phthalate manufacturing exceeded general population levels by 4- and >1000-fold, respectively. We also found instances where GM end-shift concentrations of some metabolites exceeded general population concentrations even when no workplace use was reported, e.g. BzBP in rubber hose and rubber boot manufacturing. In summary, using urinary metabolites, we successfully identified workplaces with likely occupational phthalate exposure. Additional work is needed to distinguish occupational from non-occupational sources in low-exposure workplaces.

24 June 2011 in International Archives of Occupational and Environmental Health
Verified
Journal Article
Closed access
PDF file
CHCynthia J. Hines
Cynthia J. Hines
NHNancy B. Hopf
Nancy B. Hopf
JDJames A. Deddens
James A. Deddens
MSManori J. Silva
Manori J. Silva
ACAntonia M. Calafat
Antonia M. Calafat

29 August 2013 in Journal of Occupational and Environmental Hygiene
Verified
Journal Article
Closed access
CHCynthia J. Hines
Cynthia J. Hines
JRJennifer L. Roberts
Jennifer L. Roberts
RARonnee N. Andrews
Ronnee N. Andrews
MJMatthew V. Jackson
Matthew V. Jackson
JDJames A. Deddens
James A. Deddens
Indium use has increased greatly in the past decade in parallel with the growth of flat-panel displays, touchscreens, optoelectronic devices, and photovoltaic cells. Much of this growth has been in the use of indium tin oxide (ITO). This increased use has resulted in more frequent and intense exposure of workers to indium. Starting with case reports and followed by epidemiological studies, exposure to ITO has been linked to serious and sometimes fatal lung disease in workers. Much of this research was conducted in facilities that process sintered ITO, including manufacture, grinding, and indium reclamation from waste material. Little has been known about indium exposure to workers in downstream applications. In 2009–2011, the National Institute for Occupational Safety and Health (NIOSH) contacted 89 potential indium-using companies; 65 (73%) responded, and 43 of the 65 responders used an indium material. Our objective was to identify current workplace applications of indium materials, tasks with potential indium exposure, and exposure controls being used. Air sampling for indium was either conducted by NIOSH or companies provided their data for a total of 63 air samples (41 personal, 22 area) across 10 companies. Indium exposure exceeded the NIOSH recommended exposure limit (REL) of 0.1 mg/m3 for certain methods of resurfacing ITO sputter targets, cleaning sputter chamber interiors, and in manufacturing some inorganic indium compounds. Indium air concentrations were low in sputter target bonding with indium solder, backside thinning and polishing of fabricated indium phosphide-based semiconductor devices, metal alloy production, and in making indium-based solder pastes. Exposure controls such as containment, local exhaust ventilation (LEV), and tool-mounted LEV can be effective at reducing exposure. In conclusion, occupational hygienists should be aware that the manufacture and use of indium materials can result in indium air concentrations that exceed the NIOSH REL. Given recent findings of adverse health effects in workers, research is needed to determine if the current REL sufficiently protects workers against indium-related diseases.

13 June 2018 in Annals of Work Exposures and Health
Verified
Journal Article
Open access
PDF file
CHCynthia J Hines
Cynthia J Hines
ACAnnette L Christianson
Annette L Christianson
MJMatthew V Jackson
Matthew V Jackson
XYXiaoyun Ye
Xiaoyun Ye
JPJack R Pretty
Jack R Pretty
ACAntonia M Calafat
Antonia M Calafat
Exposure to bisphenol A (BPA) can be assessed using external and internal exposure measures. We examined the relationship between two measures of external BPA exposure (air and hand-wipe samples) and one of internal exposure (total BPA in urine) for a group of US manufacturing workers. During 2013–2014, we recruited 78 workers from six US companies that made BPA or made products with BPA. We quantified BPA in seven urine samples, two full-shift air samples and in pre- and end-shift hand-wipe samples collected from workers over 2 consecutive days. We examined correlations between creatinine-corrected urinary concentrations of total BPA (total BPACR) and BPA levels in air and hand wipes using Pearson’s correlation coefficient. We also applied mixed-effects regression models to examine the relationship between total BPACR with BPA in air (urine~air model) and with BPA in end-shift hand wipes (urine~hand model), separately and together (urine~air+hand model), after adjusting for covariates. End-shift total BPACR strongly correlated with BPA in air (rp = 0.79, P < 0.0001) and nearly as strongly with BPA in end-shift hand wipes (rp = 0.75, P < 0.0001). In mixed-effect models, BPA air concentration and end-shift hand-wipe BPA level were significantly and positively associated with end-shift total BPACR (P < 0.0001 each). We found a significant effect of the Day 1 BPA air concentration on Day 2 total BPACR (P = 0.0104). When BPA air concentration and end-shift hand-wipe BPA level were in the same model, the air concentration (P < 0.0001) was more significant than the hand-wipe level (P = 0.0106). BPA levels in air and end-shift hand wipes strongly correlated with total BPACR, suggesting that both inhalation and dermal contract were likely exposure routes; however, inhalation, on average, appeared to be a more dominant exposure route than dermal contact for these manufacturing workers.

19 May 2003 in Indoor Air
Verified
Journal Article
Closed access
PDF file
CHC. J. Hines
C. J. Hines
MWM. A. Waters
M. A. Waters
LLL. Larsson
L. Larsson
MPM. R. Petersen
M. R. Petersen
ASA. Saraf
A. Saraf
DMD. K. Milton
D. K. Milton
Endotoxin was measured in air and dust samples collected during four commercial aircraft flights. Samples were analyzed for endotoxin biological activity using the Limulus assay. 3-hydroxy fatty acids (3-OH FA) of carbon chain lengths C10:0-C18:0 were determined in dust by gas chromatography-ion trap tandem mass spectrometry. The geometric mean (geometric standard deviation) endotoxin air level was 1.5 EU/m3 (1.9, n = 28); however, significant differences were found by flight within aircraft type. Mean endotoxin levels were significantly higher in carpet dust than in seat dust (140 +/- 81 vs. 51 +/- 25 EU/mg dust, n = 32 each, P < 0.001). Airborne endotoxin levels were not significantly related to either carpet or seat dust endotoxin levels. Mean 3-OH FA levels were significantly higher in carpet dust than in seat dust for C10:2, C12:0, and C14:0 (P < 0.001 for each), while the mean level of C16:0 was significantly higher in seat dust than in carpet dust (P < 0.01). Carpet dust endotoxin was significantly, but moderately, correlated with 3-OH-C12:0 and 3-OH-C14:0 (Pearson r = 0.52 and 0.48, respectively), while correlation of seat dust endotoxin with individual 3-OH FAs depended on the test statistic used. Mean endotoxin potency was significantly higher for carpet dust than for seat dust (6.3 +/- 3.0 vs. 3.0 +/- 1.4 EU/pmol LPS, P < 0.0001). Mean endotoxin levels in the air and dust of commercial aircraft cabins were generally higher than mean levels reported in homes and office buildings. These results suggest that exposure route and dust source are important considerations when relating endotoxin exposure to specific health outcomes.