12 July 2021 in IEEE Transactions on Microwave Theory and Techniques
The insatiable demand to optimize and engineer new functionalities in electromagnetic devices has risen their geometrical complexity to unprecedented levels. This usually results in computationally multiscale problems with some tiny components of great importance to the overall behavior of these devices. Block meshing is a powerful technique for treating such problems. The usage of variable mesh size is adaptable for adequately representing the geometrical details without exhausting the computational resources with a uniform fine grid in the entire computational domain. In addition, block meshing allows the use of cubic cells only for which time step in maximum and velocity error is minimal in each subregion. In this article, we present a mathematical formulation for stability and dispersion analysis when using block meshing in the transmission-line matrix (TLM) method. These relations permit us to compute the maximum mesh size and time step that guarantee a tolerable level of numerical dispersion, hence minimizing the computational expenditures. Moreover, we study the case of adopting the local time step and demonstrate the origins of the instability that may appear in this case. Finally, some numerical experiments are presented to show the advantages of the proposed approach when using TLM block meshing. A similar procedure can be used for FDTD or FIT with block meshing.
2 October 2024 in IEEE Transactions on Microwave Theory and Techniques
This article presents the mathematical model of the unconditionally stable explicit transmission-line matrix (USE-TLM) method, which can operate at a time step beyond the Courant–Friedrichs–Lewy (CFL) limit. This technique is based on the eigenmode decomposition of the system matrix that represents the computational domain. Then, by eliminating all unstable modes, the system size is reduced and is usually much simpler to manipulate in terms of computational resources. Indeed, in practical simulations, the number of modes one should conserve is very small compared to when the entire set of eigenmodes is considered. This procedure can considerably reduce the size of the system matrix leading to some substantial computational gain as compared to the traditional TLM method. Finally, some issues regarding the accuracy of the proposed technique are investigated. Several numerical experiments are presented and comparisons with other approaches show the validity and the performance of the proposed TLM procedure.
15 February 2023 in IEEE Transactions on Microwave Theory and Techniques
This article presents an optimal connection topology to model the voltage-exchange at the interface between different sub-grids in nonstructured TLM meshes. As a first step, the derivation—using Kirchhoff’s circuit laws—of these voltage-exchange equations between two subdomains with an arbitrary meshing ratio and a specific connection topology is presented. It was then generalized as an S-matrix of an N-port network that processes all desired properties in an ideal interface. In contrast to previous approaches, these S-matrix elements are derived directly for their properties and no concrete physical representation is required. Moreover, stability in this novel connection topology is ensured since all eigenvalues of the optimal S-matrix are located on the unit circle.
1 June 2026 in IEEE Transactions on Microwave Theory and Techniques