This paper presents an ac–dc rectifier for piezoelectric vibration energy harvesting application. The proposed rectifier is designed and implemented with TSMC 0.25 μm 1P3M 5 V CMOS process. Active control is proposed to eliminate the voltage drop from the traditional diode forward voltage and the reverse current from the output capacitor to input source. The simultaneously turn on and oscillation on power MOS MN1–MN2 gate signal VGN1–VGN2 has been overcome by a 40ns delay time which generated by a non-overlapping control. The experimental results indicated maximum power efficiency 95% and voltage conversion ratio 99% are achieved at 20kΩ and 200kΩ loading resistor.