The goal of this study involves developing an efficient and accurate parallel computation method for two-phase flow problems including complex moving foreign bodies. The proposed parallel computing techniques are based on the moving body-fitted grids’ overset on background multidomains with grid-overlapping at their interface. First, the cavitation flow over the hemispherical head form is investigated using the two-phase flow solver, which is validated by comparing the numerical and experimental results. Subsequently, the parallel computing technique based on the multidomain method that divides the computational domain into several smaller subdomains is proposed to facilitate more efficient numerical simulations. At the interface of the subdomains, the grid-overlapping method is proposed for more accurate simulations. The illustrative computations indicate that the accuracy of the parallel computation combined with the grid-overlapping method on multidomains is identical to that of the serial computation based on a single block, albeit with a significant reduction in the computation time. Finally, the moving overset grid technique is combined with the background multidomain method and applied to simulate the gust flow that is generated by the pitching motions of the twin hydrofoils. The overset grid technique includes the following three sequential steps: hole-cutting, finding donor cells, and bilinear interpolation. The prediction results for the inflow gust generated by oscillating hydrofoils closely follow the measured results.
A new pump, called the hybrid airlift-jet pump, is developed by reinforcing the advantages and minimizing the demerits of airlift and jet pumps. First, a basic design of the hybrid airlift-jet pump is schematically presented. Subsequently, its performance characteristics are numerically investigated by varying the operating conditions of the airlift and jet parts in the hybrid pump. The compressible unsteady Reynolds-averaged Navier-Stokes equations, combined with the homogeneous mixture model for multiphase flow, are used as the governing equations for the two-phase flow in the hybrid pump. The pressure-based methods combined with the Pressure-Implicit with Splitting of Operators (PISO) algorithm are used as the computational fluid dynamics techniques. The validity of the present numerical methods is confirmed by comparing the predicted mass flow rate with the measured ones. In total, 18 simulation cases that are designed to represent the various operating conditions of the hybrid pump are investigated: eight of these cases belong to the operating conditions of only the jet part with different air and water inlet boundary conditions, and the remaining ten cases belong to the operating conditions of both the airlift and jet parts with different air and water inlet boundary conditions. The mass flow rate and the efficiency are compared for each case. For further investigation into the detailed flow characteristics, the pressure and velocity distributions of the mixture in a primary pipe are compared. Furthermore, a periodic fluctuation of the water flow in the mass flow rate is found and analyzed. Our results show that the performance of the jet or airlift pump can be enhanced by combining the operating principles of two pumps into the hybrid airlift-jet pump, newly proposed in the present study.