A copper sol is usually synthesized by the reduction of a copper precursor with a suitable reducing agent in the presence of a stabilizer. There are few reports regarding the preparation of copper nanoparticles in glycerol without using a stabilizing agent, but at elevated temperatures. The formation of reduced copper (Cu0) is usually verified by a UV-vis spectrophotometer where a ‘red copper sol’ was formed. In the present paper we synthesized the copper sol at room temperature in a glycerol medium using hydrazine as a reducing agent. The chemical states of copper in the sol and their composition were analyzed by X-ray absorption near edge structure spectroscopy (XANES) with the linear composition fitting method. A series-parallel mechanism of the reaction was proposed. An average particle size of 5 ± 1 nm was visualized via transmission electron microscopy (TEM).
The present work demonstrates tea dust (TD) as a potential low-cost adsorbent for the removal of crystal violet (CV) from aqueous solution by batch adsorption technique. Reaction kinetics and isotherm studies were carried out under various conditions of initial dye concentration, contact time, adsorbent dosage, and pH. The adsorbent was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR) and Brunauer–Emmett–Teller. FTIR results showed complexation and ion exchange appeared to be the principle mechanism for CV adsorption. The adsorption isotherm data were fitted to Langmuir and Freundlich equations; and the maximum adsorption capacity was found to be 175.4 mg/g. The removal of CV by TD followed the unified approach model. Therefore, TD can be employed as an efficient and cost-effective adsorbent in industrial wastewater treatment for the removal of basic dyes
1 October 2018 in International Journal of Adhesion and Adhesives