16 September 2021 in IEEE Embedded Systems Letters
This letter proposes an unsigned approximate multiplier architecture segmented into three portions: the least significant portion that contributes least to the partial product (PP) is replaced with a new constant compensation term to improve hardware savings without sacrificing accuracy. The PPs in the middle portion are simplified using a new 4:2 approximate compressor, and the error due to approximation is compensated using a simple yet efficient error correction module. The most significant portion of the multiplier is implemented using exact logic as approximating it will results in a large error. Experimental results of 8-bit multiplier show that the power and power-delay products are reduced up to 47.7% and 55.2%, respectively, in comparison with the exact design and 36.9% and 39.5%, respectively, in comparison with the existing designs without significant compromise on accuracy.
16 August 2022 in IEEE Embedded Systems Letters
Approximate computing is an evolving paradigm that aims to improve the power, speed, and area in neural network applications that can tolerate errors up to a specific limit. This letter proposes a new multiplier architecture based on the algorithm that adapts the approximate compressor from the existing and proposed compressors’ set to reduce error in the respective partial product columns. Further, the error due to the approximation in the proposed multiplier is corrected using a simple error-correcting module. Results prove that the power and power–delay product (PDP) of an 8-bit multiplier is improved by up to 39.9% and 43.6% compared with the exact multiplier and 27.5% and 23.9% compared to similar previous designs. The proposed multiplier is validated using image processing and neural network applications to prove its efficacy.
16 December 2020 in IEEE Embedded Systems Letters
Approximate computing is a promising method for designing power-efficient computing systems. Many image and compression algorithms are inherently error-tolerant and can allow errors up to a specific limit. In such algorithms, savings in power can be achieved by approximating the data path units, such as a multiplier. This letter presents a novel decoder logic-based multiplier design with the intent to reduce the partial products generated. Thus, leading to a reduction in the hardware complexity and power consumption while maintaining a low error rate. Our proposed design in an 8-bit format which achieves 40.96% and 22.30% power reduction compared to the accurate and approximate multipliers. Comprehensive simulations are carried out on image sharpening and compression algorithms to prove that the proposed design obtains a better quality-effort tradeoff than the existing multipliers.
18 March 2025 in IEEE Access
Adversarial attacks, specialized attacks, pose a severe threat to AI model performance in various applications, including the Internet of Things (IoT). Various defense mechanisms have been proposed to counter these attacks. However, their primary limitation lies in their inability to effectively handle broader datasets derived from diverse applications. In this study, we utilize multiple AI models with adaptive weights applied at different neural network layers to achieve enhanced performance and more robust results. This study introduced a novel AI-based deep learning model to detect adversarial threats within IoT systems, optimizing data preprocessing, feature extraction, and classification through a holistic approach. A three-stage filtering technique featuring Adaptive Weights was applied to enhance the data preprocessing efficiency. A two-level adaptive feature extraction strategy was utilized to maximize feature learning performance. This is refined using adaptive dilated enriched convolution operations, whereas statistical attributes are optimized through a Quantum-inspired Coati Optimization Algorithm (Q-COA). A dual system based on self-attention combines a Restricted Boltzmann Machine (RBM) with a Recurrent Convolutional Neural Network (RCNN). This configuration effectively identifies adversarial attacks by linking classifiers via a self-attention-driven weight-sharing mechanism. The proposed two-level weight-sharing approach surpasses conventional classifiers and achieves superior classification accuracy. This comprehensive Artificial Intelligence (AI) model significantly improves the preprocessing efficiency, feature learning performance, and classification accuracy, offering an innovative and robust solution for adversarial attack detection in IoT systems. The performance metric, Area Under the Curve (AUC), achieves values of 0.95 and 0.97 for two datasets using the proposed model, highlighting its effectiveness compared to the models in the comparison.
9 March 2018 in Journal of Signal Processing Systems
31 March 2024 in Circuits, Systems, and Signal Processing