1 March 2019 in APL Materials
Because of its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt, β-Ga2O3 has attracted great attention recently for potential applications of power electronics. However, its thermal conductivity is significantly lower than those of other wide bandgap semiconductors, such as AlN, SiC, GaN, and diamond. To ensure reliable operation with minimal self-heating at high power, proper thermal management is even more essential for Ga2O3 devices. Similar to the past approaches aiming to alleviate self-heating in GaN high electron mobility transistors, a possible solution has been to integrate thin Ga2O3 membranes with diamond to fabricate Ga2O3-on-diamond lateral metal-semiconductor field-effect transistor or metal-oxide-semiconductor field-effect transistor devices by taking advantage of the ultra-high thermal conductivity of diamond. Even though the thermal boundary conductance (TBC) between wide bandgap semiconductor devices and a diamond substrate is of primary importance for heat dissipation in these devices, fundamental understanding of the Ga2O3-diamond thermal interface is still missing. In this work, we study the thermal transport across the interfaces of Ga2O3 exfoliated onto a single crystal diamond. The van der Waals bonded Ga2O3-diamond TBC is measured to be 17 −1.7/+2.0 MW/m2 K, which is comparable to the TBC of several physical-vapor-deposited metals on diamond. A Landauer approach is used to help understand phonon transport across a perfect Ga2O3-diamond interface, which in turn sheds light on the possible TBC one could achieve with an optimized interface. A reduced thermal conductivity of the Ga2O3 nano-membrane is also observed due to additional phonon-membrane boundary scattering. The impact of the Ga2O3–substrate TBC and substrate thermal conductivity on the thermal performance of a power device is modeled and discussed. Without loss of generality, this study is not only important for Ga2O3 power electronics applications which would not be realistic without a thermal management solution but also for the fundamental thermal science of heat transport across van der Waals bonded interfaces.
10 February 2020 in Applied Physics Letters
Gallium oxide (Ga2O3) has attracted great attention for electronic device applications due to its ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates grown from the melt. However, its thermal conductivity is significantly lower than that of other wide bandgap semiconductors such as SiC, AlN, and GaN, which will impact its ability to be used in high power density applications. Thermal management in Ga2O3 electronics will be the key for device reliability, especially for high power and high frequency devices. Similar to the method of cooling GaN-based high electron mobility transistors by integrating it with high thermal conductivity diamond substrates, this work studies the possibility of heterogeneous integration of Ga2O3 with diamond for the thermal management of Ga2O3 devices. In this work, Ga2O3 was deposited onto single crystal diamond substrates by atomic layer deposition (ALD), and the thermal properties of ALD-Ga2O3 thin films and Ga2O3–diamond interfaces with different interface pretreatments were measured by Time-domain Thermoreflectance. We observed a very low thermal conductivity of these Ga2O3 thin films (about 1.5 W/m K) due to the extensive phonon grain boundary scattering resulting from the nanocrystalline nature of the Ga2O3 film. However, the measured thermal boundary conductance (TBC) of the Ga2O3–diamond interfaces is about ten times larger than that of the van der Waals bonded Ga2O3–diamond interfaces, which indicates the significant impact of interface bonding on TBC. Furthermore, the TBC of the Ga-rich and O-rich Ga2O3–diamond interfaces is about 20% smaller than that of the clean interface, indicating that interface chemistry affects the interfacial thermal transport. Overall, this study shows that a high TBC can be obtained from strong interfacial bonds across Ga2O3–diamond interfaces, providing a promising route to improving the heat dissipation from Ga2O3 devices with lateral architectures.
27 August 2021 in Applied Physics Reviews
With significant recent advancements in thermal sciences—such as the development of new theoretical and experimental techniques, and the discovery of new transport mechanisms—it is helpful to revisit the fundamentals of vibrational heat conduction to formulate an updated and informed physical understanding. The increasing maturity of simulation and modeling methods sparks the desire to leverage these techniques to rapidly improve and develop technology through digital engineering and multi-scale, electro-thermal models. With that vision in mind, this review attempts to build a holistic understanding of thermal transport by focusing on the often unaddressed relationships between subfields, which can be critical for multi-scale modeling approaches. For example, we outline the relationship between mode-specific (computational) and spectral (analytical) models. We relate thermal boundary resistance models based on perturbation approaches and classic transmissivity based models. We discuss the relationship between lattice dynamics and molecular dynamics approaches along with two-channel transport frameworks that have emerged recently and that connect crystal-like and amorphous-like heat conduction. Throughout, we discuss best practices for modeling experimental data and outline how these models can guide material-level and system-level design.
1 May 2019 in ACS Applied Materials & Interfaces
20 April 2020 in Journal of Applied Physics
Increased attention has been paid to the thermal management of β-Ga2O3 devices as a result of the large thermal resistance that can present itself in part due to its low intrinsic thermal conductivity. A number of die-level thermal management approaches exist that could be viable for thermal management. However, they have not been assessed for β-Ga2O3 devices exclusively. Here, we explore the limits of various die level thermal management schemes on a β-Ga2O3 metal–semiconductor field-effect transistor using numerical simulations. The effects of the various cooling approaches on the device channel temperature were comprehensively investigated, along with guidance for material selection to enable the most effective thermal solutions. Among various cooling strategies, double side cooling combined with a heat spreader used in the active region of the device can suppress the device thermal resistance to as low as 11 mm °C/W, achieving a maximum dissipated power density as high as 16 W/mm for a junction temperature limit of 200 °C. A multi-finger transistor thermal model was also developed to assess the potential of β-Ga2O3 devices for higher output power applications. Overall, this numerical study shows that it is possible to achieve high power β-Ga2O3 device operation with appropriate die-level thermal management solutions.
23 November 2020 in Physical Review B
As electronic devices shrink down to their ultimate limit, the fundamental understanding of interfacial thermal transport becomes essential in thermal management. However, a comprehensive understanding of phonon transport mechanisms that drive interfacial thermal transport is still under development. The thermal transport across interfaces can be strongly affected by factors such as crystalline structure, surface roughness, chemical diffusion, etc. These complications lead to a significant quantitative uncertainty between experimentally measured thermal boundary conductance (TBC) across real material interfaces and theoretically calculated TBCs that are often predicted on structurally and/or chemically ideal interfaces. In this paper, we report on the thermal conductance across interfaces between various epitaxially grown metal films (Co, Ru, and Al) and -plane sapphire substrates via time-domain thermoreflectance over the temperature range of ∼80 to ∼500 K. The room-temperature interface conductances of Al/sapphire, Co/sapphire, and Ru/sapphire are all despite the phonon spectra differences among the metals. We compare our results to predictions of TBC using atomistic Green's function calculations and the modal nonequilibrium Landauer method with transmission from the diffuse mismatch model. We found a consistent quantitative agreement between the experimentally measured TBCs and the predictions using the modal nonequilibrium Landauer model for the , , and interfaces. This result suggests that interfacial elastic phonon thermal transport dominates TBC for the various epitaxial metal/sapphire combinations of interest in this work, while other mechanisms are negligible.