15 April 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
A novel approach to on-chip temperature sensors for non-invasive thermal characterization and monitoring of packaged GaN MMICs is presented. The proposed sensor is fully compatible with commercial GaN foundry processes and enables improved reliability estimation of highly integrated systems. A dedicated test structure is developed to demonstrate the capabilities of the sensor, and an accurate calibration method of its temperature response is proposed. This combination allows for continuous temperature monitoring during operation with electrical acquisition of temperature transients. The method also enables the thermal characterization of the device and package.
25 September 2024 in IEEE Transactions on Microwave Theory and Techniques
The influence of dynamic thermal coupling on gallium nitride (GaN) monolithically microwave integrated circuit (MMIC) power amplifiers (PAs) is investigated through transient measurements, numerical simulations, and equivalent circuit modeling. The measured thermal coupling exhibits a low-pass-filtered response, where the magnitude and cutoff frequency decrease with increasing separation from the heat source. The coupling between two neighboring transistor channels shows a fractional order transient response and a pronounced temperature increase after $\approx$ 1 $\mu$ s in the measurements. The coupling between transistors on the same MMIC is close to a first-order transient response and shows a pronounced temperature increase after 100 $\mu$ s to 2.6 ms for the measured structure. It is shown that the thermal coupling causes the transistors in the PA to operate at different temperatures, where the transient response of the PA exhibits five distinct time regions. An equivalent linear network is extracted to model the effect efficiently in a circuit simulator. Here, it is shown that the thermal coupling between neighboring transistors can change the thermal response of the PA considerably below 10 kHz. The outlined results give guidelines for predicting the dynamic self-heating in GaN PAs.
23 October 2024 in IEEE Transactions on Electron Devices
The dynamic thermal coupling within gallium nitride (GaN) high electron mobility transistors (HEMTs) is characterized and modeled in a finite element method (FEM) solver to determine the thermal impedance of the HEMT. The study presents a method for calibrating the FEM model based on transient measurements with integrated temperature sensors placed 7.5, 91.5, and 175.5 $\mu $ m away from a heat source. A sensitivity analysis is presented to show that the influence of the epitaxial layers, substrate, and die-attach layer can be differentiated. The method is used to calibrate a model that accurately replicates the measured thermal coupling. The model is assessed for different baseplate temperatures and a time-varying signal. Finally, an example is presented to show how thermal coupling changes the thermal impedance of GaN HEMTs and how the results can be used for layout optimization. The presented model and calibration method can also be used to evaluate how the device’s packaging influences its thermal impedance.
19 September 2026 in Advanced Materials Technologies