23 November 2022 in IEEE Electron Device Letters
Metamaterials are artificially constructed subwavelength structures exhibiting unprecedented electromagnetic phenomena. In this letter, an S-band MW-level metamaterial-inspired klystron using all-metal complementary electric split ring resonators (CeSRRs) was realized in the experiment. The CeSRR-loaded interaction structure of the klystron developed here features a miniaturized structure, the volume of which is only about 0.44 of the conventional counterparts. The metamaterial-inspired klystron based on the interaction structure loaded with CeSRRs was designed, fabricated and assembled. Using a pencil beam with parameters of 120 kV/80 A in the hot-test, the klystron delivered the biggest output power of 5.51 MW with gain of 55.6 dB and electronic efficiency of 57.4% at 2.852 GHz. This compact metamaterial-inspired klystron has potential applications in proton therapy facilities, tokamaks for the low-hybrid wave heating, and accelerators.
9 October 2023 in IEEE Transactions on Microwave Theory and Techniques
A compact and high-efficiency radial power combination amplifier module operating above 200 GHz is presented in this article. This module integrates TE $_{{10}}$ –TE $_{11}^{\rm CP}$ (circularly polarized TE $_{{11}}$ ) mode converters, eight-way TE $_{{11}}$ -mode radial dividers/combiners, rectangular waveguide (RWG)-to-microstrip (MS) transitions, and eight power amplifier (PA) terahertz monolithic integrated circuits (TMICs). Specifically, a high-performance septum polarizer is unprecedentedly employed as the mode converter for the radial divider. By adopting the gap waveguide technology, strict contact between the adjacent waveguide blocks is not necessary, and a high-efficiency power combination is achieved at such high frequencies. The measured return loss of the passive radial divider/combiner is greater than 14 dB, and the average insertion loss is lower than 0.5 dB in the 200–260 GHz range (26.1%-bandwidth), indicating a combining efficiency of 89.1%. Thereafter, a vertical RWG-to-MS transition with a slotted ring resonator (SRR) is presented to achieve a low-loss TMIC package. Last, the active power combination amplifier module produces a maximum output power of 240 mW at 218 GHz with an average combining efficiency of 80.5% within the band of 200–221 GHz.
10 October 2022 in IEEE Transactions on Electron Devices
A metamaterial (MTM)-inspired interaction structure for MW-level klystron at 714 MHz is proposed. The electromagnetic characteristics of MTM-inspired resonant cavities with single-bridge complementary electric split ring resonators (CeSRRs) are studied, and the cold-tested results confirm the feasibility of miniaturizing the resonant cavity. Furthermore, the beam–wave interaction simulation for the interaction structure constructed by MTM-inspired resonant cavities with single-bridge CeSRRs is carried out, demonstrating 2.28 MW of output power at 714 MHz for a 100 kV, 40 A electron beam. The radius and length of the MTM-inspired interaction structure are 1/2 and 2/3 of the conventional counterparts, respectively. The promising performance makes it attractive for future applications such as linacs.
12 July 2023 in IEEE Electron Device Letters
A dual band metamaterial (MTM)-inspired backward wave oscillator (BWO) is developed by proposing a novel dual band coaxial coupler. The MTM-inspired BWO simultaneously exhibits dual band and miniaturization properties. The dual band property is confirmed by both transmission experiments and beam-wave interaction simulations. Meanwhile, the advantage of miniaturization results from the compact high frequency structure, i.e ., its transverse and longitudinal sizes are about two-third smaller and slightly shorter than the previous BWO with the waveguide coupler, respectively. Further, the particle-in-cell results predict that the MTM-inspired BWO yields peak output powers of 114-137 kW at ~2.833 GHz and of 100-144 kW at ~4.527 GHz, respectively. Importantly, the power difference at the two frequencies is confined to ~1 dB, which is much smaller than that of the previous one with the waveguide coupler. These results confirm the feasibility of the compact dual band BWO, which might be applied to target recognition and plasma diagnostics.
6 June 2023 in IEEE Transactions on Microwave Theory and Techniques
In this article, a class of novel power divider (PD) with TE $_{10}$ /TE $_{20}$ dual-mode operation characteristic is proposed and demonstrated for the first time. The PD is based on low-loss groove gap waveguides with half-height pins and is shaped into a cruciform $E$ -plane coplanar magic-T, which has four coplanar waveguide arms. Unlike all conventional magic-Ts, its $E$ -plane waveguide dominates TE $_{20}$ mode, and $H$ -plane waveguide dominates TE $_{10}$ mode. Herein, compact waveguide transformers, waveguide steps, and cuboid waveguide ridges are employed to achieve broadband impedance matching, efficient mode conversion, and compact dimension. Therefore, the input power can be equally divided whether TE $_{20}$ mode is excited at the difference port or TE $_{10}$ mode is excited at the sum port. Conversely, TE $_{10}$ and TE $_{20}$ modes with equal power can be obtained by exciting TE $_{20}$ mode at any output port. In either case, the free port helps improve the isolation. Moreover, a broadband TE $_{10}$ –TE $_{20}$ mode converter is designed and fabricated to facilitate the measurement. The proposed prototypes are verified in the WR-4 band, and the measured results are excellent and in good agreement with the simulated results within the desired 180–250 GHz.
15 June 2023 in IEEE Transactions on Terahertz Science and Technology
In this article, a compact waveguide magic-T (WMT) with four coplanar ports is presented for sub-THz power combination applications. In the WMT, simple and robust geometries, i.e. trapezoidal irises, cuboid-shaped ridge, and waveguide step, are employed to ease manufacturing difficulties at sub-THz frequencies. Thereinto, the trapezoidal irises replace the traditional multiple steps or long chamfers to simplify the waveguide transformer and shorten the path, the waveguide step widens the available bandwidth, and the cuboid-shaped ridge reduces the difference-port reflection and acts as a coupling probe for the sum-port to improve isolation. Moreover, a bed of nails is applied to the waveguide splitting-plane for electromagnetic (EM) leakage suppression and assembly convenience. To verify this WMT, a WR-4 band (170-260 GHz) prototype is fabricated and measured, showing an average combination efficiency of 92.2% within 175-255 GHz (37.2%-bandwidth). Then, the WMT is applied to a two-way combined solid-state power amplifier (SSPA) module. Thereinto, a contactless E-plane waveguide transition with unprecedented L-shaped chock grooves (LSCGs) is presented for waveguide system interconnection. In power measurement, the power combined module produces a maximum power output of 76.6-mW @ 216-GHz.