Metamaterial absorbers have attracted considerable attention for applications in the terahertz range. In this Letter, we report the design, fabrication, and characterization of a terahertz dual band metamaterial absorber that shows two distinct absorption peaks with high absorption. By manipulating the periodic patterned structures as well as the dielectric layer thickness of the metal–dielectric–metal structure, significantly high absorption can be obtained at specific resonance frequencies. Finite-difference time-domain modeling is used to design the structure of the absorber. The fabricated devices have been characterized using a Fourier transform IR spectrometer. The experimental results show two distinct absorption peaks at 2.7 and , which are in good agreement with the simulation. The absorption magnitudes at 2.7 and are 0.68 and 0.74, respectively.
We present the simulation, implementation, and measurement of a polarization insensitive broadband resonant terahertz metamaterial absorber. By stacking metal-insulator layers with differing structural dimensions, three closely positioned resonant peaks are merged into one broadband absorption spectrum. Greater than 60% absorption is obtained across a frequency range of where the central resonance frequency is . The FWHM of the device is 48%, which is two and half times greater than the FWHM of a single layer structure. Such metamaterials are promising candidates as absorbing elements for bolometric terahertz imaging.
Three primary color (red, green and blue) filters consisting of subwavelength triangular-lattice hole arrays in an aluminum film on glass were simulated and fabricated. A silicon dioxide cap layer, deposited on the patterned aluminum film, was found to almost double the transmission efficiency for all the filters. The measured peak transmittance for each color filter was above 30%, exhibiting a wavelength spectrum with a full-width at half-maximum of approximately 100 nm. Simulation results of various structures with different cap layers revealed the enhanced coupling between surface plasmon resonances at both sides of the metal film in a symmetrical configuration. It was found that gratings with as few as three periods were sufficient to demonstrate filtering. The effect of metal thickness and hole size was investigated in detail.
Synthetic fractals inherently carry spatially encoded frequency information that renders them as an ideal candidate for broadband optical structures. Nowhere is this more true than in the terahertz (THz) band where there is a lack of naturally occurring materials with valuable optical properties. One example are perfect absorbers that are a direct step toward the development of highly sought after detectors and sensing devices. Metasurface absorbers that can be used to substitute for natural materials suffer from poor broadband performance, while those with high absorption and broadband capability typically involve complex fabrication and design and are multilayered. Here, we demonstrate a polarization-insensitive ultrathin (∼λ/6) planar metasurface THz absorber composed of supercells of fractal crosses capable of spanning one optical octave in bandwidth, while still being highly efficient. A sufficiently thick polyimide interlayer produces a unique absorption mechanism based on Salisbury screen and antireflection responses, which lends to the broadband operation. Experimental peak absorption exceeds 93%, while the average absorption is 83% from 2.82 THz to 5.15 THz. This new ultrathin device architecture, achieving an absorption-bandwidth of one optical octave, demonstrates a major advance toward a synthetic metasurface blackbody absorber in the THz band.