22 February 2023 in IEEE Transactions on Power Electronics
The sensorless control for dual three-phase motors (DTMs) under faulty conditions are insufficiently studied in previous research. This research aims to investigate the effects of single open-phase faults (SOFs) on the high-frequency (HF) injection (HFI)-based sensorless control for a DTM and present a new sensorless control method robust to the SOFs. Firstly, the HFI-based sensorless control is introduced into the αβ -subspace, where responded HF currents can reflect changes of two sets of three-phase windings simultaneously. Next, an HF fault analysis method is given to simplify the analysis process by making the inductance matrixes in the HF models unchanged under healthy and faulty conditions. Besides, an equivalent coordination method is proposed to extend the result under the phase-A SOF to an arbitrary SOF, avoiding repetitive derivation and obtaining a generalized conclusion directly. The SOFs cause the negative sequence components and varying amplitudes in the HF currents, resulting in large rotor position estimation errors. Then, a new rotor position estimation method based on a modified adaptive filter is presented to suppress these effects, which is robust to the SOFs without any fault diagnosis. The validity of the proposed analysis methods and sensorless control methods are all verified on a prototyped DTM.
12 June 2023 in IEEE Transactions on Industrial Electronics
This article proposes a Fourier-based model of vibration synthesis, improving both precision and speed. For the first time, the nonideal orthogonality between electromagnetic (EM) forces and structural modes is theoretically proposed and modeled by spatial harmonics. Different from the discrete vectors used in the previous literature, the proposed method achieves a one-dimension continuous model of EM forces and modes. On the basis, the vectors of modes and forces on tooth surfaces are decomposed by fast Fourier transform, so that the vibration response is synthesized based on Fourier coefficients. Furthermore, the proposed model is applied to a 12-slot/10-pole interior permanent-magnet machine. The spatial harmonics of mode vectors are elaborated to identify the key orders of EM forces before the vibration response is completed. Then, the proposed model is compared with the coupled-field finite element analysis (FEA). The advantages are verified in terms of computational accuracy, speed, and sensitivity to mesh quality. Finally, the feasibility of the proposed model is verified by both coupled-field FEA and experiment.
6 April 2023 in IEEE Transactions on Instrumentation and Measurement
The embedded magnetic encoder (EME), located in stator slot of permanent magnet (PM) synchronous machines (PMSMs), monitors the PM flux-density in the cavity and feedback the rotor angle for vector control. To reduce the total harmonic distortion (THD) of flux-density and improve the angle estimation accuracy, the topology optimization of PMSMs can be carried out. However, as THD is set as the only objective during optimization, the other characteristics, e.g., back electromotive-force (back-EMF) due to PMs, and winding inductance of PMSMs will uncontrollably change. Hence, a systemic design optimization of PMSM combined with EME is necessary. Different from the traditional multi-objective optimization of electric machines based on the time-consuming finite element analysis (FEA), in this paper a Kriging-assisted surrogate model is proposed to replace FEA during optimization, achieving time saving and high prediction accuracy simultaneously. The decision variables are carefully selected. e.g., a Cosine function reshaping method is proposed and proper linear Hall installation position is analyzed. In the preliminary optimization, the Pareto front with minimum THD and maximum rotor saliency is obtained. Further, by modifying the THD objective with retaining the third harmonic component, the THD becomes lower and rotor saliency is increased in the optimal case. Finally, three different rotors are manufactured to verify the effectiveness of proposed reshaping method and improved optimization strategy.
29 March 2022 in IEEE Transactions on Industrial Electronics
This article proposes a quantitative analysis model for the electromagnetic forces in rotor-permanent-magnet (rotor-PM) machines, decoupling the air-gap field modulation and the force modulation. First, a unified analytical model of the equivalent concentrated forces (ECFs) is deduced based on the air-gap flux density (AFD) harmonics. Second, the air-gap field modulation and the force modulation are decoupled by the ECF coefficient. Then, to determine the contributions of the modulated AFD harmonics, a quantitative analytical method is proposed. On this basis, the vibration performance of a 12-slot/10-pole (12s/10p) interior PM machine is investigated considering the modulation effect. The results reveal that the influences of rotation speed, PM-excited field, and armature field on the vibration can be clearly represented by the proposed method. Finally, the modal test and the acceleration measurement are conducted to validate the analysis.
17 March 2021 in IEEE Transactions on Transportation Electrification
This article investigates the production mechanism of the open-circuit back-electromotive force (back EMF) in fractional-slot concentrated winding permanent magnet (FSCW-PM) machines based on the air-gap field modulation (AFM) theory. The relationship between spatial PM field harmonics and temporal back EMF harmonics is discovered by using a general model, which is suitable for both stator-PM and rotor-PM machines. The analysis results reveal that the FSCW-PM machines produce their open-circuit back EMF on the basis of AFM, which means that each back EMF harmonic is induced not only by a specific single spatial field harmonic but also by several different spatial field harmonics. Furthermore, a general winding factor calculation formula for FSCW-PM machines is derived together with the general calculation formula of all back EMF harmonics. Finally, the analysis is verified numerically by the finite element method and experimentally.
16 June 2021 in IEEE Transactions on Industrial Electronics
In this article, we propose an improved analytical model for the fractional-slot concentrated-winding spoke-type permanent-magnet (PM) machines, where the impact of slotting on magnetomotive force (MMF) is elaborately considered. First, the deficiency of the existing MMF-permeance model using Carter's coefficient is discussed. It is found that adopting Carter's coefficient will cause considerable prediction errors in flux density, especially for machines with a small equivalent airgap and considerable PM-MMF fluctuation. Second, an improved analytical model is proposed based on the relative permeance function and a simplified magnetic circuit model. The proposed model enables to predict common electromagnetic performance, such as PM flux density and back electromotive force with higher accuracy. Moreover, the radial forces exerted on the stator teeth can be predicted precisely as well, which is conducive to further vibration analysis. Both the experimental and finite-element analysis results indicate that the proposed model can enhance the characterization capability of the slotting effect and improve the performance prediction accuracy.