1 April 2011 in Ocean Engineering
1 April 2006 in Applied Ocean Research
1 September 2007 in Journal of Ship Research
In this paper, a B-spline-based higher-order method is developed for simulating three-dimensional ship motions with forward speed. The problem is formulated in time domain using a transient free surface Green function. The body geometry is defined by open uniform or nonuniform B-spline basis functions depending on the hull type, whereas the unknown field variables are described by open uniform B-spline basis functions. The collocation method is applied to discretize the integral equation and then solved for the unknown potentials and source strengths. Motion computations in head waves are carried out for three types of ship hulls: a mathematically defined Wigley hull, a typical containership (S175 hull), and a Series 60 hull. Results are obtained for regular and irregular waves and compared with available experimental and computational results. It is found that the results from the present method are in very good agreement with the published results, and in particular with experimental data. Long-duration simulations have also been carried out with an ordinary desktop PC (PIV with 512 MB RAM) to demonstrate the ability of the method to simulate motions over long periods without any visible deterioration using only modest computational resources.
1 March 2013 in Ocean Engineering
1 June 2001 in Journal of Transportation Engineering
In this paper, a two-stage heuristic approach is presented for the allocation of buses to regional transit bus routes. In the first stage, bus frequencies required to handle peak link demand on each route are worked out. Overcrowding of buses to a certain level is considered in the computation of base frequencies. If additional fleet are available, surplus frequencies will be allocated in the second stage minimizing the degree of overcrowding in the network. Passenger discomfort due to overcrowding has been formulated as a nonlinear objective function. Genetic algorithms have been used to solve the problem of allocation of surplus fleet. Overlapping of routes, which is a common feature in many regional transit networks in India, has been considered in this model. Frequencies are set considering a maximum of one transfer. The model has been demonstrated with the help of a case study of a regional transit network in India.
1 December 2006 in Ocean Engineering