27 March 2025 in Nature Communications
In nature, insects can swiftly move and actively morph to adapt to complex and varied conditions. However, replicating this capability in insect-scale robots requires sophisticated structural designs, which are difficult to achieve at such a small scale without fundamental hardware innovations. This work proposes a coupling mechanism between actuation and morphing by combining an arc-heating actuator and shape memory alloy wires, presenting a fast insect-scale robot (83.4 body lengths per second) capable of active morphing and self-recovery. The arc-heating actuator is designed to provide the kinetic energy and the thermal energy essential for deforming the wires. The robot can compress its body thickness to traverse through a gap of 70% its height smoothly within 2.2 seconds and is amphibious. Furthermore, after enduring pressure 5 million times its weight, the robot is flattened, but fully recovers its original size and performance in just a few seconds.
14 March 2025 in Research Square
Adhesion technologies enable robots to perform specialized tasks such as climbing and grasping, making them valuable for industrial applications. Electroadhesion (EA) stands out for its wide applicability, simple control, and low power consumption among various adhesion methods. However, its practical use is limited by the slow de-adhesion speed. In this study, we propose a novel method by introducing a self-excited pulse module into the driving circuit of EA pads. During the de-adhesion process, the residual charges induce self-excited vibrations of the cantilever beam within the module, generating an external pulsed electric field that matches the EA pads. This external field neutralizes the residual electric field, enabling ultrafast release. The proposed method elevates the release speed of EA pads by more than 90 times and reduces the adhesion force decay after repeated use from 56–11%. We developed an ultrafast wall-climbing microbot based on this method, achieving a climbing speed of 4.44 cm/s (with a step frequency of 2.2Hz), which is 5.6 to 25 times faster than the robots using traditional release methods. Furthermore, we developed the first untethered electroadhesive microbot by integrating a high-voltage power system.
28 May 2025 in Research Square
Fast climbing can significantly enhance the capabilities of microbots in applications such as environmental exploration and industrial transport. However, achieving fast and untethered wall-climbing microbots remains challenging due to the trade-offs between adhesion techniques, control strategies, and energy efficiency. Here, we propose a novel electrical control method for electroadhesion (EA) that enables ultrafast de-adhesion. By integrating a self-excited pulse module into the drive circuitry of the EA pads, this method effectively neutralizes the residual electric field, allowing the EA pads to achieve release speeds 90 to 177 times faster than conventional methods. Furthermore, it reduces adhesion force decay after reuse from 56% to 11%. Based on this approach, we developed an ultrafast microbot capable of vertical and inverted climbing, with a vertical velocity of 44.4 mm/s (0.45 body lengths per second) at a step frequency of 2.2 Hz, which is 5.6 to 25 times faster than robots employing conventional release methods. Additionally, we created the first untethered electroadhesive microbot by means of an efficient control strategy and an integrated high-voltage power system.