27 April 2017 in IEEE Journal on Selected Areas in Communications
Hybrid analog and digital beamforming is a promising candidate for large-scale millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems because of its ability to significantly reduce the hardware complexity of the conventional fully digital beamforming schemes while being capable of approaching the performance of fully digital schemes. Most of the prior work on hybrid beamforming considers frequency-flat channels. However, broadband mmWave systems are frequency-selective. In broadband systems, it is desirable to design common analog beamformer for the entire band while employing different digital (baseband) beamformers in different frequency sub-bands. This paper considers the hybrid beamforming design for systems with orthogonal frequency division multiplexing modulation. First, for a single-user MIMO (SU-MIMO) system where the hybrid beamforming architecture is employed at both transmitter and receiver, we show that hybrid beamforming with a small number of radio frequency (RF) chains can asymptotically approach the performance of fully digital beamforming for a sufficiently large number of transceiver antennas due to the sparse nature of the mmWave channels. For systems with a practical number of antennas, we then propose a unified heuristic design for two different hybrid beamforming structures, the fully connected and the partially connected structures, to maximize the overall spectral efficiency of an mmWave MIMO system. Numerical results are provided to show that the proposed algorithm outperforms the existing hybrid beamforming methods, and for the fully connected architecture, the proposed algorithm can achieve spectral efficiency very close to that of the optimal fully digital beamforming but with much fewer RF chains. Second, for the multiuser multiple-input single-output case, we propose a heuristic hybrid percoding design to maximize the weighted sum rate in the downlink and show numerically that the proposed algorithm with practical number of RF chains can already approach the performance of fully digital beamforming.
4 February 2021 in IEEE Transactions on Wireless Communications
This paper shows that deep neural network (DNN) can be used for efficient and distributed channel estimation, quantization, feedback, and downlink multiuser precoding for a frequency-division duplex massive multiple-input multiple-output system in which a base station (BS) serves multiple mobile users, but with rate-limited feedback from the users to the BS. A key observation is that the multiuser channel estimation and feedback problem can be thought of as a distributed source coding problem. In contrast to the traditional approach where the channel state information (CSI) is estimated and quantized at each user independently, this paper shows that a joint design of pilots and a new DNN architecture, which maps the received pilots directly into feedback bits at the user side then maps the feedback bits from all the users directly into the precoding matrix at the BS, can significantly improve the overall performance. This paper further proposes robust design strategies with respect to channel parameters and also a generalizable DNN architecture for varying number of users and number of feedback bits. Numerical results show that the DNN-based approach with short pilot sequences and very limited feedback overhead can already approach the performance of conventional linear precoding schemes with full CSI.
4 April 2018 in IEEE Journal of Selected Topics in Signal Processing
The use of low-resolution digital-to-analog converters (DACs) for transmit precoding provides crucial energy efficiency advantage for massive multiple-input multiple-output (MIMO) implementation. This paper formulates a quadrature amplitude modulation (QAM) constellation range and a one-bit symbol-level precoding design problem for minimizing the average symbol error rate (SER) in downlink massive MIMO transmission. A tight upper bound for the SER with low-resolution DAC precoding is first derived. The derived expression suggests that the performance degradation of one-bit precoding can be interpreted as a decrease in the effective minimum distance of the QAM constellation. Using the obtained SER expression, we propose a QAM constellation range design for the single-user case. It is shown that in the massive MIMO limit, a reasonable choice for constellation range with one-bit precoding is that of the infinite-resolution precoding with per-symbol power constraint, but reduced by a factor of √2/π or about 0.8. The corresponding minimum distance reduction translates to about a 2 dB gap between the performance of one-bit precoding and infinite-resolution precoding. This paper further proposes a low-complexity heuristic algorithm for the one-bit precoder design. Finally, the proposed QAM constellation range and precoder design are generalized to the multiuser downlink. We propose to scale the constellation range for the infinite-resolution zero-forcing (ZF) precoding with per-symbol power constraint by the same factor of √2/π for one-bit precoding. The proposed one-bit precoding scheme is shown to be within 2 dB of infinite-resolution ZF. In term of number of antennas, one-bit precoding requires about 50% more antennas to achieve the same performance as infinite-resolution precoding.
11 June 2019 in IEEE Transactions on Wireless Communications
This paper considers sparse device activity detection for cellular machine-type communications with non-orthogonal signatures using the approximate message passing algorithm. This paper compares two network architectures, massive multiple-input-multiple-output (MIMO) and cooperative MIMO, in terms of their effectiveness in overcoming inter-cell interference. In the massive MIMO architecture, each base station (BS) detects only the users from its own cell while treating inter-cell interference as noise. In the cooperative MIMO architecture, each BS detects the users from neighboring cells as well; the detection results are then forwarded in the form of a log-likelihood ratio (LLR) to a central unit where final decisions are made. This paper analytically characterizes the probabilities of false alarm and missed detection for both architectures. The numerical results validate the analytic characterization and show that as the number of antennas increases, a massive MIMO system effectively drives the detection error to zero, while as the cooperation size increases, the cooperative MIMO architecture mainly improves the cell-edge user performance. Moreover, this paper studies the effect of LLR quantization to account for the finite-capacity fronthaul. The numerical simulations of a practical scenario suggest that in specific case cooperating three BSs in a cooperative MIMO system achieves about the same cell-edge detection reliability as a non-cooperative massive MIMO system with four times the number of antennas per BS.
2 March 2022 in IEEE Journal on Selected Areas in Communications
This paper proposes a deep learning approach to a class of active sensing problems in wireless communications in which an agent sequentially interacts with an environment over a predetermined number of time frames to gather information in order to perform a sensing or actuation task for maximizing some utility function. In such an active learning setting, the agent needs to design an adaptive sensing strategy sequentially based on the observations made so far. To tackle such a challenging problem in which the dimension of historical observations increases over time, we propose to use a long short-term memory (LSTM) network to exploit the temporal correlations in the sequence of observations and to map each observation to a fixed-size state information vector. We then use a deep neural network (DNN) to map the LSTM state at each time frame to the design of the next measurement step. Finally, we employ another DNN to map the final LSTM state to the desired solution. We investigate the performance of the proposed framework for adaptive channel sensing problems in wireless communications. In particular, we consider the adaptive beamforming problem for mmWave beam alignment and the adaptive reconfigurable intelligent surface sensing problem for reflection alignment. Numerical results demonstrate that the proposed deep active sensing strategy outperforms the existing adaptive or nonadaptive sensing schemes.
7 June 2021 in IEEE Journal on Selected Areas in Communications
This paper proposes a deep learning approach to the adaptive and sequential beamforming design problem for the initial access phase in a mmWave environment with a single-path channel. For a single-user scenario where the problem is equivalent to designing the sequence of sensing beamformers to learn the angle of arrival (AoA) of the dominant path, we propose a novel deep neural network (DNN) that designs the adaptive sensing vectors sequentially based on the available information so far at the base station (BS). By recognizing that the AoA posterior distribution is a sufficient statistic for solving the initial access problem, we use the posterior distribution as the input to the proposed DNN for designing the adaptive sensing strategy. However, computing the posterior distribution can be computationally challenging when the channel fading coefficient is unknown. To address this issue, this paper proposes to use an estimate of the fading coefficient to compute an approximation of the posterior distribution. Further, this paper shows that the proposed DNN can deal with practical beamforming constraints such as the constant modulus constraint. Numerical results demonstrate that compared to the existing adaptive and non-adaptive beamforming schemes, the proposed DNN-based adaptive sensing strategy achieves a significantly better AoA acquisition performance.