Motivated by the increased demand for energy storage technologies with maximum power density and safety, zinc–air batteries have drawn extensive attention. However, developing a competent and robust bifunctional oxygen reduction and oxygen evolution reaction (ORR/OER) catalyst and studying the underlying active-site mechanisms with the aim of optimizing the electrochemical process remains challenging. In this work, defective/graphitic synergy in heteroatom-interlinked-triggered asphaltene (D/G-HASP) is explored via Raman spectroscopy, density functional theory (DFT), and other characterization approaches, in which reactions involving the oxygen-containing intermediates on the carbon substrate can be accelerated by the electron deficit triggered by heteroatoms, thus enhancing the oxygen reaction performance. As estimated, D/G-HASP reveals a superior half-wave potential (E1/2 = 840 mV) and the lowest overpotential (η10 = 310 mV) towards the ORR and OER compared to its other counterparts. Remarkably, zinc–air batteries primed with such an air-electrode show outstanding reversibility and stability. This effort hence delivers insightful understanding of the synergistic reaction principles of heteroatom-interlinked-triggering nanomaterials when used in zinc–air batteries.
Lithium-ion batteries (LIBs) are considered to be among the most promising electrical storage devices for large-scale applications. In order to achieve a long lifespan and high performance for LIBs, however, it is necessary to replace the traditional graphite anode with appropriate advanced anode materials. Herein, a simple and cost-effective strategy was developed to synthesize a large–scalable nitrogen-rich sulfur-doped porous carbon (NSPC) material, which when used as an anode could deliver high-rate cycle performance with a prolonged cycle life. Benefiting from the higher nitrogen content and sulfur doping, the resultant heteroatom-doped porous carbon material exhibited a significantly high initial reversible capacity of 1096 mA h g−1 at a current density of 0.1 A g−1 with a high initial columbic efficiency of more than 67%. Even at a significantly high current rate of 5 A g−1, prolonged cycle life over 1100 cycles with outstanding cycle performance of 695 mA h g−1 was achieved. The observed ultrafast lithium ion storage is attributed to the synergic effect of heteroatom-doping and abundant mesopores with a large quantity of edge defects that enable additional lithium ion storage. Density functional theory (DFT) calculations demonstrated that the introduction of N and S atoms into the porous carbon could efficiently change the charge density distributions over the carbon structure to improve the storage capacity of lithium ions and their electrochemical performance as an anode in LIBs.
Rational design of cost effective, highly active and robust bifunctional electrocatalysts for the oxygen evolution and reduction reactions (OER/ORR) is crucial for rechargeable metal–air batteries. Encapsulating and supporting transition-metal nanomaterials for the OER in and on porous carbon-based catalysts for the ORR are the two main routes for the construction of bifunctional OER/ORR catalysts. However, none of the above two strategies has achieved simultaneous maximum exposure of OER and ORR active sites, while maintaining high catalytic stability. In this study, it is demonstrated that transition-metal oxide nanosheets/nanoflowers in situ vertically grown on Fe, N co-doped 3D-porous carbon (FeCoOOH-NS/NF⊥3D-FeNC) can achieve the simultaneous maximum exposure of both OER and ORR active centers. Benefiting from this unique vertical growth structure, the FeCoOOH-NF⊥3D-FeNC catalyst demonstrates an outstanding half wave potential of 855 mV for the ORR and a low overpotential of only 230 mV at a current density of 10 mA cm−2 for the OER, ranking it among the most active non-noble metal bifunctional OER/ORR catalysts reported in the literature. Remarkably, when being employed as an O2 electrode in primary and rechargeable zinc–O2 batteries, FeCoOOH-NF⊥3D-FeNC presents a higher power density of 220 mW cm−2 than that of Pt/C + IrO2 (190 mW cm−2) as well as excellent cycling durability.
A thermally driven interfacial diffusion strategy was employed to fabricate a trimetallic Pt 3 CoRu/C@NC catalyst with excellent enhancement towards the MOR in terms of superior stability and anti-CO poisoning.
1 July 2021 in International Journal of Hydrogen Energy