This paper presents a method for estimating the equivalent circuit parameters of three-phase induction motors by employing the extended Kalman filter. In this method, the stator currents and voltages, and rotor speed of the motor under an unspecified load and in unsaturated condition are considered. The rotor resistance, mutual inductance, and stator leakage inductance are estimated using the synchronous reference frame in the steady-state mode. Also, the rotor leakage inductance is estimated using the rotor reference frame in the transient mode. Experimental data are used to validate the analytical technique.
30 May 2022 in IEEE Transactions on Industrial Informatics
Any reduction in the cross-sectional area of wires (RCSAW) in the stator or rotor (field or damper) windings of synchronous generators (SGs) is considered as a fault in SGs. In this paper, a signal-model-based fault detection, isolation, and estimation approach based on the eigenvalues estimation of SGs is presented to diagnose RCSAW fault. The subspace identification method is employed to estimate the state matrix eigenvalues. A form of the characteristic equation in the faulty condition is introduced for fault diagnosis of SGs in the presence of linear and nonlinear loads. The stator and field currents and voltages, and the rotor speed are used for fault diagnosis. The effectiveness of the introduced fault diagnosis method is shown using simulation and experimental results on a salient-pole SG in Iran-Safir (ER24) diesel-electric locomotives.
This paper introduces the Improved Iterated Extended Kalman Filter (IIEKF) for estimating the rotational speed, rotor resistance, and stator resistance of three-phase induction motors (IMs). Two state-space models for estimating the variables are presented. An optimal estimation of rotational speed is obtained by introducing a data fusion approach. The effectiveness of the IIEKF in comparison with the Extended Kalman Filter (EKF), using experimental data and in a wide range of operating conditions, is shown.
1 April 2019 in Mechanical Systems and Signal Processing
In this paper, an online model-based fault detection approach based on residual analysis in synchronous generators (SGs) is presented. Two types of faults are studied in this paper: (i) reduction of the cross-sectional area of windings wires in SGs, and (ii) air-gap eccentricity. The residual vector based on the equivalent circuit (EC) parameters or state-space model of the SG is employed for fault detection. The introduced fault detection approach employs the stator and field currents and voltages, and rotor rotational speed. The main advantage of the presented method is able to be used for linear and nonlinear loads in the presence of uncertainty in EC parameters. The effectiveness of the proposed method is shown using the experimental data of five SGs in diesel-electric locomotives.