Nanostructured niobium oxide (NO) semiconductors are gaining increasing attention as electronic, optical, and electro-optic materials. However, the preparation of stable NO nanofilms with reproducible morphology and behavior remains a challenge. Here we show a rapid, well-controlled, and efficient way to synthesize NO films with self-organized columnlike nanostructured morphologies and advanced functional properties. The films are developed via the growth of a nanoporous anodic alumina layer, followed by the pore-directed anodization of the Nb underlayer. The columns may grow 30–150 nm wide, up to 900 nm long, with an aspect ratio of up to 20, being anchored to a thin continuous oxide layer that separates the columns from the substrate. The as-anodized films have a graded chemical composition changing from amorphous Nb2O5 mixed with Al2O3, Si-, and P-containing species in the surface region to NbO2 in the lower film layer. The post-anodization treatments result in the controlled formation of Nb2O5, NbO2, and NbO crystal phases, accompanied by transformation from nearly perfect dielectric to n-type semiconductor behavior of the films. The approach allows for the smooth film growth without early dielectric breakdown, stress-generated defects, or destructive dissolution at the respective interfaces, which is a unique situation in the oxide films on niobium. The functional properties of the NO films, revealed to date, allow for potential applications as nanocomposite capacitor dielectrics and active layers for semiconductor gas microsensors with the sensitivity to ethanol and the response to hydrogen being among best ever reported.
1 July 2018 in Annals of Anatomy - Anatomischer Anzeiger
Solvent vapour annealing (SVA), which consists of exposing the active layer of organic films to a vapour of solvent directly after deposition, has been used in small molecule bulk heterojunction (SM-BHJ) solar cell devices whose active layer consisted of 3,6-bis(5-(benzofuran-2-yl)thiophen-2-yl)-2,5-bis(2-ethylhexyl)pyrrolo[3,4-c]pyrrole-1,4-dione (DPP(TBFu)2) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM). We demonstrate that upon SVA, well-ordered crystalline domains of the DPP(TBFu)2 donor form inside the active layer, improving greatly the Fill Factor (FF) of the devices. However, SVA treatment is always accompanied by a decrease in device short circuit current (JSC). We demonstrate, using 1D and 2D XRD and AFM, that crystalline domains of DPP(TBFu)2 form in a matrix of PC71BM acceptor. The crystallinity increases with annealing time (ta) and the change in FF and JSC is directly linked to this. The X-ray single crystal structure of the DPP(TBFu)2 donor was solved and provided information of the donor's packing in the solid state. The donor molecules were shown to pack in a herringbone arrangement and shown to form a highly texturized active layer film. We demonstrated that the ability of the donor to form large and highly texturized crystalline domains in the active layer is as equally as determining for the devices' characteristics as the individual stacking properties of the donor in the solid state.