5 December 2024 in Physica Scripta
A compact (0.35 × where is free space wavelength at the lower resonance frequency 3.50 GHz) bio-inspired tulip flower-shaped antenna (TFSA) is proposed. A double negative (DNG) metamaterial complementary split ring resonator (CSRR) is introduced near the feed in the hybrid triangular-circular patch which inserts a notch-band (4.20–4.38 GHz) in the wide bandwidth (3.15–7.05 GHz) and makes the antenna response dual-band. Consequently, this results in in-band interference reduction in 5G-Sub-6 GHz applications. A slotted FSS is placed at a distance of 28.507 mm beneath the monopole-reduced ground of the antenna to enhance the reduced gain from 4.39 dBi to 7.22 dBi. A further gain is improved to 12.84 dBi by placing a full copper surface (0.35 × 0.35 ) as the reflector layer is placed below FSS at 1.6 mm. Finally, prototyped TFSA with FSS and reflector model achieve a dual bands reflection coefficient response (3.15–4.20 GHz): n77/n78, and (4.38–7.03 GHz): n46/n47/n96/n102/n79. The antenna reflection coefficient is tested using Keysight 14 GHz FieldFox Microwave Analyzer N9916A, and radiation patterns in the E-plane and H-plane are measured using an 18 GHz anechoic chamber. The comparison of simulated results with measured results is found an excellent match in bandwidth and with shapes of gain radiation patterns. The reflector and FSS jointly make the radiation pattern strong in the E-plane above the TFSA radiator. The antenna is well suited for n77/n78 (3.30–4.20 GHz), n79(4.40–4.99 GHz), n46 (5150–5925 MHz), n47 (5855–5925 MHz), n96/n102 (5925–6425 MHz), 5.8 GHz HiperLAN, WiMAX 3.5 GHz applications. An electrical equivalent circuit model of the proposed TFSA antenna is presented and validated using ADS software.
11 February 2025 in Physica Scripta
This work contributes a compact FSS antenna novel dual-band miniaturized planar antenna for 5G Sub 6 GHz implementations and its design considered the challenge of designing an antenna with reduced dimensions, which in turn is expected to be more cost-effective to produce and exhibit lower interferences compared to existing market solutions. The low-loss double-layered miniaturized rectangular microstrip antenna consists a dipole strip array mirror reflector frequency selective surface (FSS) layer beneath the antenna ground at an optimized gap that makes the antenna multi-layered and improves its directional radiation characteristics. The existing antennas are based on the same principle of Fabry–Perot cavity interference and achieve ultra-wideband (UWB) bandwidth with a larger substrate size. Therefore, they have in-band applications interferences issues with 5G. These issues are remedies by reduction in the UWB bandwidth and substrate size miniaturization trade-off. A 74.11% antenna size miniaturization is achieved with a 47.6% reduction in the –10 dB bandwidth in comparison to the base antenna of size 49 × 49 mm2. The introduced notch-band (5.63–5.85 GHz) bifurcate the UWB bandwidth. Therefore, the notch band works as the boundary between the extra-applications bands (5.85–8.62 GHz) and 5G applications band (1.70–5.63 GHz) and eliminates in-band applications interferences. The overall volume of the 3D antenna is controlled by optimizing the two substrates gap. A parametric study of the modified miniaturized antenna dimensions has been conducted, and the simulation results were validated through experimental measurements. Since the antenna covers almost FR1 (1.0–6.0 GHz) range, therefore, it is the most appropriate candidate for all 5G bands including the main n77 (3.3–4.2 GHz), n78 (3.3–3.8 GHz), and n79 (4.4–5.0 GHz), Global System for Mobile Communication, Personal Communication Services (PCS), Wi-Fi/WLAN/Bluetooth, Wi-MAX (3.5 GHz), HiperLAN (5.8 GHz), C-band (5.85–8.0 GHz), and Lower 6G band (7.125–8.40 GHz) applications.