Ensuring leak tightness and preventing emissions in bolted flange connections are critical for maintaining safety, reliability, and environmental compliance in industrial systems. This article offers a comprehensive review of techniques to improve installation processes and establish effective monitoring systems for bolted flange connections. The discussion on installation techniques focuses on achieving the appropriate gasket surface pressure to minimize leakage risks and enhance long-term reliability. The importance of proactive monitoring during installation is emphasized, as it enables the early detection and resolution of potential issues. The review also explores long-term monitoring strategies, spanning both traditional methods and advanced technologies. While direct observation is cost-effective, it lacks precision and fails to ensure safety. More advanced approaches, such as internal mass balance and real-time transient models, deliver superior detection and quantification capabilities, albeit with increased complexity and cost. External monitoring systems, such as cable-based sensors and hydrocarbon-sensing tubes, are highlighted for their effectiveness in broad-scale applications. Meanwhile, advanced techniques such as bolt load monitoring and fiber-optic sensing offer state-of-the-art solutions for identifying leaks and emissions. This work organizes these methodologies into distinct categories and provides a practical framework for applying them across various operational contexts. By emphasizing advancements in real-time monitoring and leak prevention, this study promotes safer and more sustainable industrial practices, laying the foundation for future innovations in bolted flange sealing technology.
29 June 2022 in Mechanical Systems and Signal Processing
Bolted flange connections play a crucial role in industrial process plants. They serve as interconnections between piping systems and process flow equipment. Ensuring their leak-tight operation is essential for personnel safety, for environmental protection, and for decreasing CO2 emissions. In this context, this paper proposes a novel approach to assess the sealing performance of flange gaskets during both assembly and service life. The focus is on direct measurement of the gasket surface pressure using fiber Bragg grating-based sensors. To do so, we instrumented 2 spiral wound gaskets with an optical fiber containing 8 wavelength-multiplexed Bragg gratings. We subjected the gaskets to multiple loading and unloading cycles up to 90 kN. The proposed method allows for the measurement of tightness classes according to EN 13555, offering a valuable tool for predictive maintenance strategies. Our study establishes the link between the measured strain and actual leakage in view of assessing the sealing quality during both assembly and service. We demonstrate the measurement during gasket assembly down to tightness class L0.001. Additionally, we identify a threshold to detect the tightness class L0.01, which remains valid following three loading and unloading cycles, and therefore has potential to support predictive maintenance strategies.
Direct laser writing of fiber Bragg gratings (FBG) in free-standing optical fibers is often avoided due to the cylindrical geometry of the fiber, which distorts laser beam focusing and affects process efficiency. A common approach to mitigate this is immersing the fiber in an index-matching liquid, which adds complexity to the fiber preparation process. Here, we propose an alternative and novel point-by-point (PbP) grating writing approach in free-standing optical fibers that leverages the influence of fiber curvature on focusing conditions to our advantage, allowing for beam shaping, fast alignment, and efficient inscription of high reflectivity FBGs with very low birefringence. We first used ray tracing simulations to accurately assess astigmatic focusing conditions inside optical fiber caused by fiber’s cylindrical shape. Then we implemented an additional slit beam shaping by means of spatial light modulator to achieve nearly circular intensity distribution and refractive index modification in the fiber core cross-section. Moreover, we developed a novel alignment approach that relies on fiber curvature for fast and sub-micrometer accuracy alignment of the laser focus coordinate system to that of the optical fiber. We benchmarked our approach by inscribing a series of first-order PbP FBGs up to 20 mm in length, evaluating grating strength, insertion losses and birefringence under varying focusing conditions and for different values of laser pulse energy. With accurate modeling and experimental implementation, we were also able to demonstrate highly reflective FBGs with birefringence as low as Δ n < 3.3 × 10 −6 . Our results highlight a promising approach for further development toward versatile, and high-precision FBG inscription technique tailored to the demanding requirements of advanced fiber sensing, high-power lasers, astrophotonics filtering, and quantum photonic systems.